12V/24V 30A PWM Solar Charge Controller with LCD Screen(QWP-1430RSL)

1. Product Introduction

This solar controller is a kind of intelligent, Multifunctional solar charge controller.
There serial products adopt customized LCD display screen, which makes the
Operation on the interface rather convenient. All the controlling parameters can be
Reset flexibly to satisfy your different needs. This controller has following features:

Features of 30A solar controller:
· Image of LCD graphic symbol
· Simple button operation
· Automatic Identification System Voltage level
· Intelligent PWM charge mode
· Automatic Temperature Compensation
· Adjustable charge-discharge control parameters
· Settable Operating mode of Load
· Overload, Short Circuit Protection
· Remote monitoring and control function (custom)
· Battery reverse-discharge protection
· Battery Low Voltage Disconnection (LVD)
· Battery reverse connection protection
· Accumulated function of charge and discharge Ampere hours

Pictures of 30A Solar controller

Advantage:

1. Low Cost

Solar controller has specifically designed to meet the needs of the rural electrification market. The low cost resulted from using the latest electronic technology and high volume manufacturing.

2. High Reliability

We are manufacturer of solar charge controllers, power inverters, and solar power systems. All our products are designed for high quality and high reliability. The controller has a low failure rate and will last a long time, and got very good feedback from customers until now

3. Easy to use

Solar controller is fully automatic and requires no adjustments or user selections.

Any question welcome to contact with us any time
Model No.    QWP-1430RSL
Rated charge current    30A
Rated charge voltage    12V/24V
Maximum voltage of solar panel    ≤ 50V
Float voltage    13.7V/27.4V
Low voltage disconnection    10.7V/21.4V
Low voltage recollection    12.6V/25.2V
No load loss    <30mA
Loop voltage    < 17 0mA
Charging mode    PWM mode
Installation cable area    > 7 AWG (< 16 mm2)
Temperature compensation    -4mV/Cell/degree
Operating temperature    -20~ 60ºC
Storage temperature    -30~ 70ºC
Humidity requirement    ≤ 90%,no condensation
Mounting hole spacing    60mm*178mm-Φ5
Model suffix "Z" represent automatic identify system voltage level, "T" represent controller with remote monitoring.