1. Characteristic

The rig adapts to deep well drilling in the complicated terrain, such as: the desert, gobi, grasslands, swamps, beaches, seasonal waters, etc. The piston air compressor(the screw air compressor option)and the piston mud pump are installed, they are used to complete the blasting holes, cement paste (water) grouting holes, monitoring holes or well drilling constructions with the direct circulation drilling method. It is a powerful truck-mounted rig of comprehensive drilling ability.

The rig is mounted on a 4X4 desert off-road vehicle chassis, and the drilling power is obtained directly from the chassis PTO. A combination of mechanical and hydraulic transmission, manual control and air-pressure control operation is installed in the rig. The machine has the feature of simple structure, flexible and simple operation and efficient construction ability.

The constant hydraulic system is used to control the rig, the ordinary reversing valve of large flow is also used, it ensures that the rig is easy to maintain, reliable and long lasting, be of lower cost.

The mud pump and the air compressor both are controlled by the pneumatic clutch, which is powered of the undercarriage air source and easy to operate.

The automatic tilt mechanism of the drill head is provided, which greatly improves the efficiency of screwing and unscrewing the drill tools and reduces the labor intensity of workers. According to the actual record, the time is cut by half on the process of unscrewing the drill tools after completed the well.

The enhanced truss structure mast is installed, the chain wheel assembly is located in the upper place which ensures that the hoisting system is safely.

2. Main Specification

Drilling method/Depth

Mud drilling: 200 m Air drilling/Hammer drilling: 150 m

Pipe: (diameter×length): Φ63×4500

Hole diameter: 114mm

Power swivel: Rated torque: 4000 N.m

Rated speed: 0～335 r/min

Hydraulic system: Working pressure: 190bar

Push down/ Hoisting system/Hydraulic motor+chain

Max. hoisting weight: 4000 kg

Max. push down Force: 32 kN

Max. hoisting speed: 1.2 m/s

Derrick: Square section trusses frame

Machine stabilization:  Two rear jacks

Pipe clamp: Mechanical clamp /Hydraulic clamp (options)

Unscrew tool: Mechanical slide fork /Hydraulic slide fork (options)

Air piston compressor /Standard