10 tons of plastic tank manufacturer

10 tons of plastic storage tank 10 cubic Chongqing plastic tank manufacturer

Large plastic water tank mostly rotomolding production, a molding. Such as plastic tanks, plastic boats, plastic jar, PE dosing tank, plastic tanks, plastic drums, large plastic boxes and other aquatic party products, the wall thickness of large, high-durability, product size is relatively large. Production time consuming. Large individuals.
Performance: forming a smooth inside and outside, with good hygienic properties and UV resistance, impact resistance, anti-earthquake and difficult to aging, not long algae, easy to clean, rodent, termite, install and easy to move. General resistance to acid water tank can hold hot liquids, chemicals, strong acid liquid. Usually 90 degree heat resistant, can withstand a minimum of minus 30 degrees temperature. Plus formula after a high temperature to over 117 degrees. Polyethylene English referred to as PE, low density polyethylene maximum application temperature 60 ℃, high density polyethylene 70 ℃. Minimum application temperature of -70 ℃. With no welding seams, no leakage, non-toxic, anti-aging, impact resistance, corrosion resistance, long life, meet the health standards and so on.
experiment method
1, feel, visual welding is completed tank shall comply with the provisions of 4.2.
2. Fill the water tank test:
Close the drain valve and the valve, filled to a predetermined level, after 2h ~ 3h, various parts of the tank may not have significant deformation and leakage phenomenon.
3, test water quality indicators according to GB / T 5750 regulations.
4, visual inspection:
Under normal light by visual inspection.
Verticality 5,10 tons of plastic water tank measuring with determination shall comply with the provisions of 4.10.
6, connecting flange connection method GB T 9119-2000 specified / test; connecting pipe thread according to GB / T 7360.2-2000 prescribed method of test.
7 and 10 tons of plastic used in stainless steel tanks and carbon steel plate check its purchase of conformity, disputed by GB / T 3280 and GB methods / T 700 specified test.
13, the insulation layer by visual inspection.
● Features
①10 tons of plastic molding tank integrity, and no welds, never leakage, high impact resistance, high tensile strength, anti-oxidation, anti-aging properties, in line with food hygiene standards.
② due to the linear low density polyethylene (LLDPE) excellent performance and rotational molding tank special structure, the service life of more than 15 years.
③ chemical resistance is excellent, except for a few solution can swell it, almost can withstand most of the substance solution.
④10 tons of plastic tanks have internal and external corrosion characteristics, can be placed in highly corrosive environments.
⑤ tank general conditions of use ambient temperature and pressure; special circumstances, the conditions of use for the tank temperature is less than 70 ℃ and hydraulic less than 1kg / cm12.
⑥ Rotational antiseptic tanks on large-sized large-capacity bulk products have a very big advantage, though bulky, but only then to maintain the integrity of a molding characteristics, which is not the Department of the processes of the other storage tanks.
⑦ compared to traditional antiseptic tank, low prices, high cost performance.
Product materials:
Using high quality imported raw materials and food-grade plastic materials used formula. Product Process: the use of foreign mature ROTATIONAL (rotational molding) technology, process integrity, a molding. Supply jar, high degree of sintering, fine density, high strength, high temperature, easy to use and easy to carry, light weight and wrestling is not bad, combined with modern high-tech products, well replace the clay jar, a product launch, It attracts all kinds of large wineries
Product performance and advantages:
Products with no welding seamless, non-toxic and tasteless, acid and alkali resistance, impact resistance, high temperature (80 ℃), freeze-resistant (-58 ℃), no leakage, not aging, no maintenance and cleaning, safe and convenient installation and transportation, etc. advantage. Our products by the China People's Insurance Company to provide credibility of product liability insurance.
Product Applications:
Plastic tanks are widely used in making alcohol industry cylinders. Instead of the traditional ceramic cylinder having health, non-friable. Easy stacking. Does not contain plasticizers detected fully qualified and so on.

10 tons of plastic storage tank 10 cubic Chongqing plastic tank manufacturer