Basic features:

1. The totally enclosed squirrel-cage asynchronous motor meets the IE34-1 Standard.

2. The motor shell is made of the stainless steel coils from Taiwan, and the rotor shaft, coupling and pump shaft are all made of anti-corrosion stainless steel materials.

3,the motor end cover adopts the copper alloy material.

4, the automatic pressure regulating device is the water-proof and oil resistant nitrile butadiene rubber modified balloon.

5, it adopts the NSK bearings produced by the world-class bearing manufacturer- NSK LTD. to prolong motor’s service life.

6, the mechanical sealing is the “Italian” imported mechanical sealing featuring high temperature resistant, corrosion resistant, and wear resistant characters.

7, the motor is full of the United States JAX (Fisk) "food-grade" coolant oil, the top cooling lubricant in today’s world. It’s green and environmentally friendly, without any pollution.

8, the mounting dimension can meet the NEMA standard 4-inch flanges connection. 9,equipped with an intelligent control chamber that can realize automatic control and protection.

10,The unique suspended impeller structure.

Working Conditions:

1. the medium temperature should not exceed +20 degrees centigrade(clean water at room temperature);

2. PH value of the medium should be between 6.5 and 8.5;

3. Solid content in the medium (in mass) should not exceed 0.01.

Important Notes:

1. The Product Manual should be carefully read before the electric pump is put into use. 2. The electric pump should be reliablly grounded prior to use.

3. Fuse and leakage protection switch should be installed on the power supply end.

4. Test running of the electric pump without water should be strictly prohibited.

5 Only after test running is successfully accomplished, can the electric pump be put into use.

6. Power cable and the high-temperature items must be kept separately to ensure the good insulation of the power cable so as to prevent any injury resulting from power leak. 7. Ensure that the electric pump runs completely in the water rather than lying down, standing out of water or sinking into mud.

8. No people or livestock should appear around the working area of the electric pump to avoid any electric shock.

9. Power should be cut off before inspecting, handling and maintaining the electric pump.

10. The cable should not be pulled when the electric pump is being lifted or handled. Once damage is found, replace immediately!