plastic granulating line 
1,SS compact agglomerator 
2, 38CrMoAlA screw and barrel 
3, water-ring cutter 
4, ABB inverter 
 

As PE, PP film is hard to granulating, hard feeding, easy to bridging, low production capacity, especially, our company introduced and absorbed the foreign advanced technology, and combination of using forcing feeding structure that has a crushing function, which can force feeding the materials into the screw extruder after the film is pre-plasticized, thereby the special structure is helpful for increasing productivity; through the exhausting function that make the better looking particles with good gloss. Production capacity is from 200-1000kg/h, which can be comparable with similar foreign equipment. 

 

the granulating line is used to granulate the recycled clean PE/PP/BOPP soft materials such as films and bags materials.

 

 

 

Properties

 

1, agglomerator is cutting compactor type, feeding to barrel directly, save 30-50% power compare to the 

 

traditional agglomerator;

 

2,reducer is vertical type, big torque, smaller area requirement;

 

3,barrel and screw are made of 38CrMoAlA, with nitriding processing

 

4, pellet cutter with 3blades, wate-ring cooling and cutting at the same time

 

5, cooling water circular use.

 

6, vertical centrifugal dewatering, humidity<2%,

 

7, speed of main motor and pelleting cutter motor are control by ABB inverter, 

 

8, ABB inverters, SIEMENS electrical parts, OMRON temp. meter

 

9, belt conveyor and agglomerator are coordinated control, if more materials are in agglomerator, the belt

 

conveyor will stop a little while, and convey mateials again till there is less materials in agglomerator

 

 

 

the complete granulating line generally consists of the following units

 

No	machine Name	qty	power (kw)
1	belt conveyor	1	2.2
2	agglomerator(connect to extruder drectly)	1	30-90
	forced feeder(for hard materials)	1	1.1-5.5
3	single-screw extruder	1	22-160
4	hydraulic screen changer	1	3
5	water-ring pellet cutter	1	1.5-3
6	dewatering machine	1	3-11
7	cyclone silo	1	3-11
8	control cabinet	1

 

 

 

Standard screw models 

 

Screw diameter(mm)	75	90	100	120	150	175
L/D	75/25	90/25	100/25	120/10	150/10	175/10
	75/38	90/28	100/28	120/20	150/20	175/25
	75/32	90/32	100/32	120/26	150/26
	75/34			120/28	150/28
					150/32

 

 

 

Available capacity at present

 

capacity(kg/h)	50-100	100-150	150-200	200-300	300-400	400-500
plastic	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp
	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS

 

 

 

By your real situation, our professional technical Team will design the best proposal solution for you, and 

 

we promise to send you the best offer at the same time  plastic granulating line 
1,SS compact agglomerator 
2, 38CrMoAlA screw and barrel 
3, water-ring cutter 
4, ABB inverter 
 

As PE, PP film is hard to granulating, hard feeding, easy to bridging, low production capacity, especially, our company introduced and absorbed the foreign advanced technology, and combination of using forcing feeding structure that has a crushing function, which can force feeding the materials into the screw extruder after the film is pre-plasticized, thereby the special structure is helpful for increasing productivity; through the exhausting function that make the better looking particles with good gloss. Production capacity is from 200-1000kg/h, which can be comparable with similar foreign equipment. 

 

the granulating line is used to granulate the recycled clean PE/PP/BOPP soft materials such as films and bags materials.

 

 

 

Properties

 

1, agglomerator is cutting compactor type, feeding to barrel directly, save 30-50% power compare to the 

 

traditional agglomerator;

 

2,reducer is vertical type, big torque, smaller area requirement;

 

3,barrel and screw are made of 38CrMoAlA, with nitriding processing

 

4, pellet cutter with 3blades, wate-ring cooling and cutting at the same time

 

5, cooling water circular use.

 

6, vertical centrifugal dewatering, humidity<2%,

 

7, speed of main motor and pelleting cutter motor are control by ABB inverter, 

 

8, ABB inverters, SIEMENS electrical parts, OMRON temp. meter

 

9, belt conveyor and agglomerator are coordinated control, if more materials are in agglomerator, the belt

 

conveyor will stop a little while, and convey mateials again till there is less materials in agglomerator

 

 

 

the complete granulating line generally consists of the following units

 

No	machine Name	qty	power (kw)
1	belt conveyor	1	2.2
2	agglomerator(connect to extruder drectly)	1	30-90
	forced feeder(for hard materials)	1	1.1-5.5
3	single-screw extruder	1	22-160
4	hydraulic screen changer	1	3
5	water-ring pellet cutter	1	1.5-3
6	dewatering machine	1	3-11
7	cyclone silo	1	3-11
8	control cabinet	1

 

 

 

Standard screw models 

 

Screw diameter(mm)	75	90	100	120	150	175
L/D	75/25	90/25	100/25	120/10	150/10	175/10
	75/38	90/28	100/28	120/20	150/20	175/25
	75/32	90/32	100/32	120/26	150/26
	75/34			120/28	150/28
					150/32

 

 

 

Available capacity at present

 

capacity(kg/h)	50-100	100-150	150-200	200-300	300-400	400-500
plastic	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp
	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS

 

 

 

By your real situation, our professional technical Team will design the best proposal solution for you, and 

 

we promise to send you the best offer at the same time  plastic granulating line 

1,SS compact agglomerator 
2, 38CrMoAlA screw and barrel 
3, water-ring cutter 
4, ABB inverter 
 

As PE, PP film is hard to granulating, hard feeding, easy to bridging, low production capacity, especially, our company introduced and absorbed the foreign advanced technology, and combination of using forcing feeding structure that has a crushing function, which can force feeding the materials into the screw extruder after the film is pre-plasticized, thereby the special structure is helpful for increasing productivity; through the exhausting function that make the better looking particles with good gloss. Production capacity is from 200-1000kg/h, which can be comparable with similar foreign equipment. 

 

the granulating line is used to granulate the recycled clean PE/PP/BOPP soft materials such as films and bags materials.

 

 

 

Properties

 

1, agglomerator is cutting compactor type, feeding to barrel directly, save 30-50% power compare to the 

 

traditional agglomerator;

 

2,reducer is vertical type, big torque, smaller area requirement;

 

3,barrel and screw are made of 38CrMoAlA, with nitriding processing

 

4, pellet cutter with 3blades, wate-ring cooling and cutting at the same time

 

5, cooling water circular use.

 

6, vertical centrifugal dewatering, humidity<2%,

 

7, speed of main motor and pelleting cutter motor are control by ABB inverter, 

 

8, ABB inverters, SIEMENS electrical parts, OMRON temp. meter

 

9, belt conveyor and agglomerator are coordinated control, if more materials are in agglomerator, the belt

 

conveyor will stop a little while, and convey mateials again till there is less materials in agglomerator

 

 

 

the complete granulating line generally consists of the following units

 

No	machine Name	qty	power (kw)
1	belt conveyor	1	2.2
2	agglomerator(connect to extruder drectly)	1	30-90
	forced feeder(for hard materials)	1	1.1-5.5
3	single-screw extruder	1	22-160
4	hydraulic screen changer	1	3
5	water-ring pellet cutter	1	1.5-3
6	dewatering machine	1	3-11
7	cyclone silo	1	3-11
8	control cabinet	1

 

 

 

Standard screw models 

 

Screw diameter(mm)	75	90	100	120	150	175
L/D	75/25	90/25	100/25	120/10	150/10	175/10
	75/38	90/28	100/28	120/20	150/20	175/25
	75/32	90/32	100/32	120/26	150/26
	75/34			120/28	150/28
					150/32

 

 

 

Available capacity at present

 

capacity(kg/h)	50-100	100-150	150-200	200-300	300-400	400-500
plastic	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp	pe/pp
	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS	PET/PS

 

 

 

By your real situation, our professional technical Team will design the best proposal solution for you, and 

 

we promise to send you the best offer at the same time