Name :  Self-adhesive  caulk strip  for use between bathtub and floor 

   Function : Waterproof & Mildew resistant ,Provides a long-lasting, watertight seal.

   Material : PE + Butyl Rubber 

   Size :   3.18cm(width) x 1.52m(length)

   Packing : Blister packaing 

   Using method :

  1:   Clean the area which need adhesive sealing,and keep it dry

  2:   Measure the length of the area to be sealed to determine the correct length and cut the strips                   accordingly.

  3:   Take the strip ,measure again and mark on the strip with pencil ,then cut it .

  4:    Peel the first 2 inches of back adhesive paper and press the waterproof strip on the place.

  5:   Continue to peel the back adhesive paper for 2 inches once along the length.

  6:    While installing,press firmly over the length to ensure a watertight seal.

  7:    For the best result, protect area from water for at least 24 hours.

  8:    When indoor temperature is lower than 23 degree,need use hair dryer to heat the backing glue for          best effect.

  Product details :