BO-A One-component Compound Adhesive (PMMA/PVC Color Film)

    BO-A is a one-component environmental compound adhesive for bonding (wet-base) between Plexiglas sheet (PMMA) and PVC color film. Compound product bonded by the adhesive is characterized by high transparency and strong adhesion. And the use of operation is easy. It is widely applied to decorative material industry. It is suitable for the market abroad because of environmental protection, low odor, and fast-drying.

Technical performance index
1.Appearance: Clear or light yellow transparent sticky liquid;
2.Viscosity: 40~50s (#3 cup);
3.pH value:6-7;
4.Peel strength: Substrate will be broken if peeling off by hand after Plexiglas sheet and PVC color film have been bonded together in 24 hours.

Process condition and requirement
1.This product is suitable for wet-base bonding.
2.The amount of adhesive(wet-basis):≥30 g/ ㎡
3.After 24 hours at room temperature, you can take next process.
4.Dilute it with ethyl acetate or butyl acetate if need.

Cautions
1.Can’t be mix with other Adhesives.
2. To avoid turbidity, please clean all equipment, including plastic tank, buckets and relevant tools before using the adhesive.
3. The process ratio in this paper is for reference only. Due to different manufactures are with different technology conditions, raw material conditions and equipment conditions, we recommend that manufactures confirm the pre-tests or consult with us before using. Our products are only sold according to general condition.
4. According to customer demand for products, we can make the overall design of the program, including modifying the product formulation and setting the process methods.