RS-1000 Mobile Station & Politern Machine is used for production of foam and polystyrene concrete of various densities. An in-built gerotor pump allows you to transport prepared mixtures under pressure to grout beds. The station can be operated both is steady-state conditions and on construction sites. RS-1000 Politern Machine can be used for walls cast-in-situ, when arranging for floor screeds, for heat- and sound-proofing of roofs, attics, and basements. The mixture prepared can be transported over the distance of about 120* m horizontally and up to 30* m vertically. For foam concrete production, the station is equipped with an in-built foam generator. The station throughput is up to 6 cu. m per hour. The control cabinet mounted on the station body enables one operator to control all the functions. 


The station is made up of the following sub-assemblies:
- Compounding vessel (volume of 1,000 l) is used for mixture preparation;
- Mixing screw conveyor is used for mixing components;
- Gear motor for mixing screw conveyor drive transmits rotation through a vee belt drive;
- Foam generator is used for foam generation during foam concrete production;
- Single screw pump is used for pumping the mixture from the compounding vessel through pipelines to a grout bed;
- Electric motor for pump drive transmits rotation to the pump through a vee belt drive;
- Electric cabinet which has station control buttons on its panel.


Buying RS-1000, you also get:
- A highly reliable station;
- Process procedure for foam and polystyrene concrete production;
- Process procedure for foam and polystyrene concrete cast in situ;
- Recommendations for product use;
- GOSTs required for production;
- 12-month after-sales service, advisory service of manufacturing technicians;
- Manufacturing technician’s on-site visit for station adjustment, mixture proportioning, working out operating practices for item production and in-situ casting, or personnel training (optional).