Separated solar human body induction flood light

Product Parameters:

Solar panel: 5W import solar panel, 17% of light energy conversion rate;                      

Light source: 44pcs of led lamp, 10W, 1000lm;

Charging battery: 3.7V/8000mAh, 18650 type lithium battery;                            

Light size: 240*120*92mm;                                      

Solar panel size: 180*270mm;                                              

Lighting mode: Human body induced within 3~5m and 120 degree.                          

Brightness Index: 10W led equal with 200W incandescent light.                      

Irradiated area: 60~70 square meter

Charging time: 9 hours under standard sunshine              

Lighting time: A full charge can work continuously for a week.                            

Working temperature:  -25℃~65℃

Product Description:

Thicken aluminum lamp shell

New thicken aluminum lamp body with perfect waterproof, impact resistant, high temperature resistant, anticorrosion and anti-oxidation, long lifetime up to 10 years.

Seamless waterproof design

zero-gap between upper and lower cover, internal waterproof seal ring prevents the water into it effectively.

Stainless steel movable support

The angle of light can be adjusted flexibly. Simple and convenient. 

Link joints

waterproof features protects the normal working of circuit.

Solar panel

smart polycrystal light sensitive solar panel with big power of 10W and 17% of photoelectric conversion. Tempered glass surface, anti-oxidation, anti-corrosion, high hardness, well sealed.

4m link wire

Separated link, can be mounted both indoor and outdoor, and finally realize more applications.

led lamp beads

Adopts 44pcs of high brightness and no decline led lamp beads, with long life, wide beam angle, uniform illumination and no flash.

Human body sensor

High sensitive human body sensor, the wide-field detected angle based on human body detection ways can reach to 120 degree. The maximum detection distance is 3m.

Operation process:

Before the installation, turn on the red button behind the lamp to open the lighting system,and then install it at the place facing the sun.

1.Lamp keeps in self-closing when charging under the sunshine.

2.Lamp keeps in self-closing when charging under the sunshine.

3.Lamp will induct the move of human when someone close to it, and convert to high brightness automatically.

4.Lamp will convert to shimmering automatically when human leaves 2m away from it.

3m straight line control of induction distance : 

The normal status of light keeps in shimmering, when someone walk into the induction area, light will convert into high brightness and last for 30 seconds. If there is an inadvertent action or keeps static, light will convert into shimmering till dawn. It's nearly no consumption for shimmering.