https://www.facebook.com/level3evcharger/?ref=bookmarks

Please no hesitate contact me if you have any need or question, email  ;

lily@inverterwholesale.com           0086-134 2515 7873

 

 

EV Charger Indoor Charging Station, Wall Mounted type

 

1. Overview:

 

SETQCY series DC charging station is mainly used for electric vehicle fast charging. Products can be installed outdoors, with waterproof, dustproof design IP54. This DC fast charging station has charging interface, man-machine interface, communications, billing and other parts, modular design, easy installation, operation and maintenance and simple, and the charger with the use of electric vehicles outdoor DC fast charge ideal choice.

 

 

 2. Product Features:

 

1.Intelligent module, CPU module built intelligent management, with manual / automatic dual control ;

2.Distributed control system, a single module failure does not affect system operation ;

3.Module efficiency up to 95%;

4.Charging module has a sleep function, based on the number of modules automatically select the size of the load current to start, so that the module and efficient operation ;

5.Charging module uses a unique full isolation dust structure, built-in cooling fan with intelligent speed control, and can automatically adjust the fan speed according to the load operation, to extend the life of the fan;

6.Acceptable remote trip command to achieve the emergency stop function.

7.Charging module comes with APFC function, power factor of 0.99, the total harmonic current distortion THD <5%charging

 

 

 

3. How to choose EV charging station for your cars:

 

 

 

SETQCY DC quick charger consists of charging modules, monitor, smartmeter, HMI, communication module, charging connector, management and cabinet.

 

 

 

DC Quick charging station offers Electric Vehicle owners an opportunity to charge their car safely and quickly. A typical electric car with 24kWh battery pack may be charged as quickly as 20 minutes to get up to 80% of its capacity.

 

 

 

For example,

 

 

 

We know Nissan Leaf battery capacity is 24KWH,

 

if you use our 20KW EV charger,

 

1,it needs 24KWH/20KW=1.2hour=72minutes from 0% to 100%.

 

 

 

2,if you use our 40KW EV charger,

 

 it needs 24KWH/40KW=0.6hour=36minutes from 0% to 100%.

 

 

 

different output power of EV charger, different charging speed.

 

 

 

The Charger combines industry standardization with advanced charging technology to support next-generation electric vehicles.  Seamless integration with several payment & billing platform solutions enable easy and secure payments via station payment terminals and RFID card.

 

 

 

 

 

4. Structure Diagram:

 

5.System Technical Data:

 

	Name	content	remark
Machine Index	Full load efficiency	≥95%
	OHZ~20MHz clutter VP-P	0.20%
	Current unaverage in parallel	≤5%
	insulation strength (V)	2000VAC/50Hz	10mA,1min No flash off
	Insulation resistance(MΩ)	10	Ground
	Power Surge	no	Soft Start
	Module load indication	LED Display output DC current  LED10 setion	LED10 ,+3LED
	Output current display accuracy	≤±10%
	Communication Interface	CAN2.0B
Environmental Indicators	Ambient temperature	-25~55  ℃	storage:-40~70 Celsius
	Humidity	≤90%(40±2 Celsius)	storage:95%(40±2 )
	Altitude	1500m	derating use when it is above 1500m
	Electromagnetic Compatibility	EN55022 CLASS A	(YD/T983-1998) A grade
Input indicators	Line Voltage(VAC)	380
	Voltage Type	AC three-phase four-wire
	Frequency(HZ)	45~55
	Power Factor	0.99
	Current THD value	≤5%
	Input undervoltage protection value(V)	323±5V

 

	Input undervoltage protection value(V)	323±5V
Output Indicators	Nominal output voltage(V)	700V
	Output Current(A)	0~100A
	Regulation accuracy	≤0.5%
	steady current accuracy	≤1%
	Ripple Peak factor	≤0.5%
	The output voltage range(V)	600~750V
	Short circuit current(A)	≤30A	Single Module
	Output Power	0kW~50kW
Mechanical indicators	packaging	Wooden packing
	Dimensions(W×H×D)	544×88×430(Rectifier module) 2260×600×600(System Cabinets)	mm
	Module weight	13Kg
	System Weight	<160Kg
	protection grade	IP21
other	Parallel Extensions	≤6	The number of modules operation in parallel
	Cooling	Air Cooled	Load, temperature joint control

 

6. Main Screen:

 

 

7. SETEC Team installed Wall Mounted EV charger