Tenet Vehicle Loop Detector PD-232 2 RELAYS in Parking Management System

 

Introduction:

The PD-232 is a dual channel microprocessor based detector designed specifically for  parking and vehicle access control applications.The primary function of the detector is  to detect vehicle presence by means of an inductance change caused by the vehicle passing over a wire loop buried under the road surface.

The various modes are selected by changing the position of switches on the front of the unit. The detector oscillator is multiplexed to eliminate any possibility of crosstalk between the loops connected to the detector. The switches allow for different loop frequency settings, sensitivity settings and modesettings.

The unit has a number of initial selectable options for configuration of relay outputs.

The PD-232 provides visual outputs ( LED ) on the front of the enclosure and relay  change-over contacts at the 11 pin connector at the rear of the enclosure. The power LED indicates that the unit has been powered. The channel status LED’s below indicate that a vehicle is present over the loop and when there is a fault on the loop. The Presence relays are normally fail secure and will close on a vehicle detect or loop failure but not if there is a power failure.

 

A.Application Scope :

 

A1)Parking lot entrances vehicle detection ;

A2)Parking lot space information acquisition system ;

A3)Electronic police traffic lights snap shot system ;

A4)Traffic monitoring system .

 

B.Main Characteristics:

B1) Supply voltage AC: 220V, 110V, 24V, 12V
B2) Supply voltage DC: 24V, 12V
B3) Sensitivity: adjustable in 3 increments (high .medium. low)
B4) Storage temperature: -40°C to +85°C
B5) Reaction time: 100ms
B6) Loop connection wiring: Maximum length 200 meters,
B7) Twisted at least 20 times per meter
B8) Net Weight: 300g

 

PD-232 Detector CONNECTOR 

PIN  DESIGNATION

1  Live    230V AC input

2  Neutral  ±15% 50/60 Hz

3  Channel 2  Common

4  No Use

5  Channel 1  Common

6  Channel 1  N/O

7  Channel 1 loop Twist

8  Channel 1  loop this pair

9  Channel 2  loop Twist

10  Channel 2  loop this pair

11  Channel 2  N/O

 

About Us :

Shenzhen Tenet Technology CO.,LTD.

Established in 2001, is a large-scale high-tech private
enterprise integrating research & development, production,sale,with over 15 years experience .
We supply a complete set of solutions , for example,
1.PMS (Parking Management System)
2.PGS (Parking Guidance System)
3.Barrier Gate,Ticket Machine
4.Other Security Equipments :Parking card dispenser machine, Vehicle loop sensor, RFID reader, 
Parking access controller, Barrier gate, Ticket machine, Parking LED display and so on .

 

A letter to customers 

Dear friend,

Welcome to visit here .

This is Mandy from China Tenet .

Tenet  is professional in Parking System & Equipment ,with more than 15 years experience.

Any questions , feel free to contact me .

It’s my great honor if we can set up good relationship.

Thanks and best regards

Mandy

Skype: tenet_mandy

Email: huangmh@chinatenet.com 

Tel.: +86 15889635036