Seamless and Welded Butt Weld Fittings from a full range of Carbon, Stainless & Alloy seamless pipe and Plate in the following product size ranges.

Long Radius Elbows in diameters from 1/2" to 24" in thicknesses up to SCH160

Short Radius Elbows in diameters from 1/2" to 24" in thicknesses up to SCH160

Reducers both eccentric and concentric in diameters from 1/2" to 16" in thicknesses up to SCH160

Caps in diameters from 1/2" to 72" in thicknesses up to SCH160

Tees in diameters from 1/2" to 16" in thicknesses up to SCH160

Lap End in diameters from 1/2" to 12" in thicknesses up to SCH80

And The Welded Fittings in diameters up to 48" in thicknesses up to SCH160.

3D Bends in diameters from 16" to 48" in thicknesses from 1/4" to 3"

Crosses & Laterals in diameters from 2" to 72" in thicknesses from 1/4" to 6"

B.W. Accesories in carbon steel and alloyed.

A234. Pipe is accesories for high to moderate temperature orders required.

A420. Pipe is accesories for low temperatures orders required in all its grades.

A860. Pipe is accesories very little alloyed and with a high elastic limit.

B.W. accesories in stainless steel

A403. Pipe is accesories in 304L-316L stainless steel.

B.W. Elbows from 45, 90up to 180, short or long radius.

B.W. Tes, reduced or all the same ones.

B.W. Excentric and concentric reductions.

B.W. Caps.

ANSI NORM B 16.9

Lengths form1/2" up to 48".

For the production of our coil unit,we adopt two processes as Medium Frequency induction heating and cold bending.The bend-diameter and spacing can accoding the clients' requirements.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,Titanium-nickel alloy, copper-aluminium,etc.

Production specification: DN25 DN200

Schedule ranges: Sch10 Sch160

Manifold is one of the typical products which researched and developed by ourselves. To manufacture the bend and straight pipes,we all adopt the process of dydraulic hot-acrosomal towing.The geometric dimensions are accurate,the height of the bracket is high,and the wall thickness is grid.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,etc.

Production specification: DN150 DN1500

Schedule ranges: Sch10 Sch160

Bends of our company are adopted the manufacturial process of Medium Frequency induction heated, water colded forming.

Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,

Titanium-nickel alloy, copper-aluminium,etc.

Production specification: DN40 DN600

Schedule ranges: Sch10 -Sch160

Pipes & Tubes Seamless, EFW, ERW, DSAW and Forged

Sizes available: 1/8" through to 64" Nominal Bore.

Wall thickness:1mm through to 4".

Material Grades :

Stainless Steel A312 304/L, 310, 316/L, 321/H, 347/H, 410, 440, 904L.

Carbon Steel A106Gr.B/C, A179, API 5L Gr.B.

Dimensions :

All pipe is made and controlled to the relevant standards such as:

ASME, ASTM, BS, DIN/WERKSTOFFE.

FLANGEPIPE@163.COM