ain Features

♦ Industrial design, suit for automotive card dispensing equipment such as automotive card dispenser, road barrier and which in the car lots and so on
♦ Simulation manpower friction issuers, better adaptability to various deformed cards
♦ Watchdog of hardware and micro-embeded real-time operating system to ensure reliable operation
♦ Pre-dispense function accelerate dispensing speed
♦ Directly connect to the inductor
♦ Automatic buzzer alarm when cards warehouse is full
♦ Automatic reset after the wrong alarm of 100S
♦ RS232 and I/O voltage interface is offered
♦ The card dispensing mode can be choose; fitting for mul-channels card dispenser
♦ Adjustable capacity of card warehouse
♦ The card thickness can be adjusted within 0.2mm-2.4mm (Default:0.8mm) 

♦ Motherboard slip design makes the installation and removal simple, convenient and fast 
♦ Die-wide production ensures the products quality and consistency

♦ Power Supply: 24VDC

♦ MAX Current : 2A
♦ Static Current: 0.1A
♦ Working Temperature: -30℃ to 70℃
♦ Working Relative Humidity: 30-90% 
♦ Working Condition: Installed In Bin 
♦ Card Width: 54 ± 0.5 mm Card Length: 85 ± 0.5 mm
♦ Card Thickness: 0.2-2.4 mm Adjustable (Default 0.8mm )
♦ Card Material:Paper and Polyester Cards.
♦ Net Weight: 1.5Kg(Including Card Block)
♦ Dispensing Time: Approx. 0.5S
♦ Card Collection: YES
♦ Card Box Height:150mm
♦ Interface Mode: Low Level I/O RS 232
♦ Dimension: 230*78*228mm

◊ Open the unit

→ Remove the power

→ Take out the pressure block

→ Put card into the unit

→ The press block should be put at last

→ Check the dispenser transportation machine and make sure the safety

→ On power

→ Close the unit

Lack card(Loading Card) 

Card Jam(unable to dispense card)