Large Servo Traverse Robot Arm for Injection

Model:	CG-S3
Brand:	CALET
Origin:	Made In China
Category:	Industrial Supplies / Rubber & Plastics Machine
Label:	robot arm , robot for injection , robot for molding
Price:	-
Min. Order:	-

Inquire Now

Product Description

1.Always are standard as follow,but also can be customized by customer request and make the most suitable manipulator for your injection molding machine.

2.Imported equipment processing center to ensure and improve every components precision.

3.Be selected as "National high and new technology enterprises",having Professional R&D team

MODEL	CG1200WS-S3	CG1400WS-S3	CG1600WS-S3	CG1900WS-S3	CG2200WS-S3	CG2500WS-S3	CG3000WS-S3	CG3500WS-S3
Arm type	Double section single arm
Suitable for injection molding machine	400-680 tons	500-1000 tons	600-1200 tons	800-1800 tons	1200-2500 ton	1600-3300 ton	1800-4000 ton	2000-5000 ton
Vertical stroke	1200mm	1400mm	1600 mm	1900mm	2200mm	2500mm	3000mm	3500mm
Draw stroke (before and after)	300-1200mm	300-1500mm	300-1500mm	400-1800mm	400-1800mm	550-2100mm	550-2100mm	550-2300mm
Horizontal stroke	2000mm	2300mm	2700mm	3000mm	3400mm	3800mm	4200mm	4500mm
Max load (including fixture)	15 kg (Posture torque 40N.M)		30 kg (Posture torque 82N.M)		50 kg (Posture torque 176N.M)		50/80 kg (Posture torque 176N.M) (Posture torque 265N.M)	80 kg (Posture torque 265N.M)
Minimum fetch time	2.0sec	2.1sec	2.4sec	2.8sec	3.3sec	3.8sec	4.8sec	5.8sec
Driven system	Servo motor
working pressure	5-7kgf/cm2
Air consumption (NI/cycle)	3.5	3.5	4.0	4.0	5.5	5.5	5.5	8.0
power consumption	4.0KVA		5.0KVA		7.0KVA		8.0KVA	11.0KVA
N.W	900kg(+-5%)	950kg(+-5%)	1300kg(+-5%)	1400kg(+-5%)	2100kg(+-5%)	2300kg(+-5%)	2700kg(+-5%)	3200kg(+-5%)

1.When working pressure is less than 5kgf/cm2,the max load will reduce and circulation time will be add

2.When using Absorb function,need to add the extra 10 NI/cycle Air consumption.

advantage of this product :

1.used Precision guide rail with aluminum alloy structure beam,Reduce the height of up/down arms,greatly improve the stability and speed of arm running

2.Three axis all use servo motors,transfering by Rack and pinion to Avoid the elasticity because of very long synchronous belt,so that it can ensure the accurate positioning of the large stroke operation.

3.The control system can realize the three axis linkage to short the positioning time.