Technical Datas of Sawdust Pellet Machine with reducer driver

Raw materials for pellet machine
 It can process various kinds of biomass raw materials such as wood, trunck, branch, sawdust, straw, rice husk, bamboo sawdust, peanut shell, bagasse waste, alfalfa, a variety of crop stalk and other agricuntural waste, etc. If you are not sure how your materials perform in pelletizing, you can send us some sample of the material and we can help you test the pelletizing process and send you the final products.
Requirements for raw material:
Size: Less than 5mm(All the raw materials must be crushed into sawdust before going to wood pellet mill, If not,you may need a wood chipper,wood crusher)
Moisture:Generally,10-15% is best for producing good quality pellet.
 

Features of Biomass Wood Pellet Machine With Reducer Driver

1. Upward mould, special structure; vertically feeding, and easier heat dissipation.

2. Die static, roller rotating, material centrifugation, distributed around evenly; because of the die high side, the material can be kicked back to the pressure room.
3. Double-layer die, up and down dual-use, high capacity, saving energy.
4. Adjust the length of pellets and briquette with frequency conversion
5. Grease filtrated, automatic lubrication and link compaction.

We mainly supply pellet machines and related equipments as following:
1. The SKJ Series flat die pellet mill with the volume 100kg to 4T per hour.
2. TheTY JSeries ring die pellet mill with the volume 800kg to 5T per hour.
3. The SKJD Series Pellet Mill with Diesel Engine with the volume 100kg to 400kg per hour.
4. The SKJT Series Pellet Mill with Tractor Engine with the volume 80kg to 400kg per hour.
5. Hammer Mill
6. Wood crusher
7. Wood chipper
8. Drum dryer
9. Packing machine
10. Whole pellet production line from the volume 0.5 ton to 20 ton per hour.

For further information of the pellet mill,please kindly contact me.

Ms. Jennifer
Phone: +86 15854107188
www.tonyjixie.com