Hazardous Materials Stores are designed and engineered to meet the requirements for safe and secure storage of highly flammable liquids, petroleum spirits, liquid petroleum, gas and pesticides. The Hazardous Materials Stores provide you with the means to meet the extensive demands of today’s legislation whilst at the same time minimising the risk to people and the environment.

Standard specifications:

External Walls – Fully galvanised structural steel panels with internal supports. Wall sections are welded to the perimeter of both the bunded base and roof panels.

Floor – Slip resistant spillage bund 150mm deep constructed from 4.5mm thick continuously welded Durbar steel plate.

Doors – External outward opening double doors constructed from galvanised steel, mounted on a zinc plate full height “piano” hinge. The doors are designed to fully open through 180 degrees and incorporate two five lever mortice deadlocks, a heavy duty door retainer and a number of reassuring anti-jemmy security features as standard.

Ventilation – Natural ventilation is achieved by means of high and low level permavents complete with flame arrester gauze and vermin guards located in the external walls.

Base – Perimeter base frame of welded steel angle supported on full length rolled steel channel section skids.

Roof – Heavy duty full galvanised and mechanically interlocking structural steel panels riveted, bonded and sealed with polyurethane adhesive

External Finish – A zinc rich galvanic primer is applied to all external mild steel surfaces and weld areas. Fully galvanised panels are spray coated with mid grey semi-gloss fast enamel with trims including base frame, fascia and doors in a contrasting bright red.

Lifting Eyes – Hazguard stores are supplied with heavy duty roof mounted galvanised steel lifting rings for ease of handling and added security.