Cast steel angular grit produced by crushing specially heat treated steel shot Its behaviour in service depends
on hardness - a characteristic readily modified by suitable heat treatment.
GP Steel Grit is used mainly in wheel blast machines for cleaning or preparation work on special surfaces
In addition, GL and GH Steel Grit are equally suitable for use in wheelblast machines and in most cases air
blast equipment.

Steel grit Application:

auto- and manual blasting of metal products (castings, forgings, steel constructions, pipelines);
shot-peening of heavy-loaded parts (shafts, carriage springs, springs, cog-wheels) ;
surface treatment of stone, granite-, marble- and natural stone-cutting;
cleaning of cutting tools;
surface preparation of parts for galvanic coatings, enameling;
surface preparation of oil and gas pipelines for multi-layer coatings;
cleaning of oil-storages and reservoirs

SAE J444 sizes:
G10 G12 G14 G16 G18 G25 G40 G50 G80 G120

Steel Grit Specification:
Shape : angular
Hardness :GP:42 ~ 50HRC;GL:56 ~ 60HRC;GH:63 ~ 66HRC
Density : 7.4 g/cm3
Durability : >3000 times
Certificate ISO9001,SAEJ444,SGS

Chemical Composition:
Cr 0.60-1.60%
C 0.70 -1.20%
Mn 0.6 -1.20%
Si 0.40 -1.20%
S <0.05%
P <0.05%

Normal packing: 25kg/bag,then 40 bag per one ton bag/pallet
Delivery time: 3-5 days for one 20ft container.
Production ability: 1000 tons per month
Payment terms: T/T,L/C

Steel Grit Applications
1.Stone cutting
2.sandblasting
3.surface preparation before coating
4.surface roughing

We are manufacturer of abrasives media for more than 10 years experience. We produce steel grit, steel shot, garnet & steel cut wire shot.
If you are interested in our abrasives,welcome email us for more information.