SEVERING WIRE ROPE: Where severing the rope is permitted, the section that is damaged must be discarded. Two undamaged sections may not be spliced to make a longer rope. If the undamaged part that remains is too short for the drum to have two full wraps of rope when the load and/or boom is in its lowest position, the rope cannot be used and must be replaced.

ELECTRICAL CONTACT WITH POWER LINE: Wire rope that has made electrical contact with a power line (either by the rope, the equipment, or the load contacting the line) must be immediately removed from service even if no damage is visible. The rope may have suffered internal damage that cannot be repaired.

DEFECTS THAT REQUIRE REMOVAL FROM SERVICE OR SEVERING: The following defects require that the rope either be removed from service or the defective part severed.

SMF Heavy Industry (Suzhou) Co., Ltd., located in kunshan city electronic production base of Taiwanese businessmen accumulation of kunshan city in jiangsu province. Since the company founded in 2003, has been committed to lifting machinery research and development, design, manufacture, sales and services, has now become domestic product lifting machinery of emerging enterprises. Total assets of more than 2000 ten thousand yuan, covers an area of 10000 square meters, construction area of 5000 square meters, office area of 1500 square meters, with modern design research and development center, processing center, assembling center, testing center.

emall:sales66(a-t)chn-crane(d-o-t)com