12V / 24V/ 48VDC Single Phase Hybrid Solar Inverter with Charger
| Model: | HP 1KW-12KW |
|---|---|
| Brand: | UPSEN |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution |
| Label: | Solar Inverter , 1 Phase Inverter , DC AC Inverter |
| Price: |
US $100
/ pc
|
| Min. Order: | 5 pc |
Product Description
12V / 24V/ 48Vdc single phase Hybrid Solar inverter with charger
Pure Sine Wave Inverter Charger Hanker Power Star Series 1KW-12KW (1ph in/1ph out)
HP Series Pure Sine Wave Inverter is a combination of an inverter, charger, solar power and Auto-transfer switch into one complete system . It is packed with unique features and it is one of the most advanced
inverter/chargers in the market today.
Feature of HP Series Inverter & Charger
1:Ability to select/deselect power saver mode
2:Optional LCD display and Remote control swtich
3:Less power consumption than convertional units
4:Selectable charging current based on applications
5:Pure sine wave output, available for sensitive load
6:High conversion efficiency, low temperature rise, low noise
7:Feature-rich, stable and reliable, with high cost performance
8:Smart battery charger design to optimize battery performance
9:With independent patent technology to run and control automatically
10:PFC(Power Factor Correction) for charger, less power consumption than conventional units
Application
Office Equipment,Notebook Computer,Remote switching,Control equipment,Communication systems,Portable lights,Alarm systems,Power tools,Acoustics,monitor,security systems,information center etc.
Technical Specification |
|||||||||||
| Model | HP1K | HP1.5K | HP2K | HP3K | HP4K | HP5K | HP6K | HP8K | HP10K | HP12K | |
| Inverter
Output |
Continuous
Output Power |
1.0KW | 1.5KW | 2.0KW | 3.0KW | 4.0KW | 5.0KW | 6.0KW | 8.0KW | 10.0KW | 12.0KW |
| Surge Rating(20s) | 3.0KW | 4.5KW | 6.0KW | 9.0KW | 12.0KW | 15.0KW | 18.0KW | 24.0KW | 30.0KW | 36.0KW | |
| Output Waveform | Pure Sine wave/Same as input(Bypass Mode) | ||||||||||
| Nominal
Efficiency |
>88%(Peak) | ||||||||||
| Line Mode
Efficiency |
>95% | ||||||||||
| Power Factor | 0.9-1.0 | ||||||||||
| Nominal Output
Voltage rms |
100-110-120Vac / 220-230-240Vac | ||||||||||
| Output Voltage
Regulation |
±10% RMS | ||||||||||
| Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | ||||||||||
| Short Circuit
Protection |
Yes( 1sec after fault ) | ||||||||||
| Typical
transfer Time |
10ms(Max) | ||||||||||
| THD | < 10% | ||||||||||
| DC
Input |
Nominal Input
Voltage |
12.0Vdc | |||||||||
| ( *2 for 24Vdc, *4 for 48Vdc) | |||||||||||
| Minimum Start
Voltage |
10.0Vdc | ||||||||||
| Low Battery Alarm | 10.5Vdc / 11.0Vdc | ||||||||||
| Low Battery Trip | 10.0Vdc / 10.5Vdc | ||||||||||
| High Voltage Alarm | 16.0Vdc | ||||||||||
| Low Battery
voltage recover |
15.5Vdc | ||||||||||
| Idle Consumption
-Search Mode |
< 25 W when Power Saver On | ||||||||||
| Charger | Output Voltage | Depends on battery type | |||||||||
| Charger
Breaker Rating |
10A | 15A | 20A | 20A | 20A | 30A | 30A | 40A | 40A | 40A | |
| Max Charge
Power Rate |
1/3 Rating Power | ||||||||||
| Battery Initial
Voltage for Start Up |
10-15.7V for 12V( *2 for 24V, *4 for 48V) | ||||||||||
| Over Charge
Protection Shutdown |
15.7V for 12V (*2 for 24V, *4 for 48V) | ||||||||||
| Remote Control | Yes(Optional) | ||||||||||
| Bypass &
Protection |
Input Voltage
Waveform |
Sine wave (Grid or Generator) | |||||||||
| Nominal Voltage | 110Vac | 120Vac | 220Vac | 230Vac | |||||||
| Max Input
AC Voltage |
150VAC For 120Vac LV Mode;300VAC For 230Vac HV Mode; | ||||||||||
| Nominal Input
Frequency |
50Hz or 60Hz (Auto detect) | ||||||||||
| Low Freq Trip | 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz | ||||||||||
| High Freq Trip | 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz | ||||||||||
| Overload protection
(SMPS load) |
Circuit breaker | ||||||||||
| Output Short
circuit protection |
Circuit breaker | ||||||||||
| Bypass breaker
rating |
10A | 15A | 20A | 30A | 40A | 40A | 40A | 50A | 63A | 63A | |
| Transfer switch
rating |
30amp for UL & TUV | 40amp for UL | 80amp for UL | ||||||||
| Bypass without
battery connected |
Yes (Optional) | ||||||||||
| Max bypass current | 30amp | 40amp | 80amp | ||||||||
| Solar
Charger (Optional) |
Rated Voltage | 12Vdc / 24Vdc / 48Vdc | |||||||||
| Solar Input
Voltage Range |
15-30Vdc / 30-55Vdc / 55-100Vdc | ||||||||||
| Rated Charge
Current |
40 ~ 60A | ||||||||||
| Rated Output
Current |
15A | ||||||||||
| Self Consumption | < 10mA | ||||||||||
| Bulk Charge | 14.5V(default) | (*2 for 24Vdc, *4 for 48Vdc) | |||||||||
| Floating Charge | 13.5V(default) | ||||||||||
| Equalization Charge | 14.0V(default) | ||||||||||
| Over Charge
Disconnection |
14.8V | ||||||||||
| Over Charge
Recovery |
13.6V | ||||||||||
| Over Discharge
Disconnection |
10.8 V(default) | ||||||||||
| Over Discharge
Reconnection |
12.3V | ||||||||||
| Temperature
Compensation |
-13.2mV/°C | ||||||||||
| Ambient
Temperature |
0 ~ 40°C(Full load) 40 ~ 60°C(Derating) | ||||||||||
| Mechanical
Spec |
Mounting | Wall Mount | |||||||||
| Inverter
Dimensions(L*W*H) |
388*415*200mm | 488*415*200mm | 588*415*200mm | ||||||||
| Inverter
Weight (Solar Chg)KG |
21+2.5 | 22+2.5 | 23+2.5 | 27+2.5 | 38+2.5 | 48+2.5 | 49+2.5 | 60+2.5 | 66+2.5 | 70+2.5 | |
| Shipping
Dimensions(L*W*H) |
550*520*310mm | 650*520*310mm | 750*520*310mm | ||||||||
| Shipping Weight
(Solar Chg)KG |
23+2.5 | 24+2.5 | 25+2.5 | 29+2.5 | 40+2.5 | 50+2.5 | 51+2.5 | 62+2.5 | 68+2.5 | 72+2.5 | |
| Display | Status LEDs / Status LEDs+LCD | ||||||||||
| Standard Warranty | 3 Years (Optional)
|
||||||||||
Member Information
| Shenzhen UPSEN Electric Co., Ltd. | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Manufacturer |
| Phone: | 15112443431 |
| Contact: | Nancy (sales manager) |
| Last Online: | 30 Jun, 2015 |
