QS 10inch 800W 205 (30H) E-Scooter Normal/V1 Type Hub Motor

When placing order, pls. advise below points:

1. Voltage, RPM or kV 

2. Disc brake or drum brake

Thank you for your cooperation.

Motor Spec 

 

Speed S estion

The  voltage we could be 48v, 60v, the max. speed can be customized to from 30 to 40km/h.

Rough calcuation formula of speed:

V=0.9*RPM*2πr*60/1000   V (KPH), RPM=un-load RPM, r=radius of tire

As Power=Torque*RPM/9.549, the more RPM is, the less torque it will be. 

Tips: Please advise Voltage & RPM when placing order, If there is no marking, we will make it 48V 530RPM.

We s est to choose Balance/2nd model for mass production, as the repair rate of high speed model will be higher.

 

Controller S estion

The power of controller should ≥ power of motor.

For 10inch 205 800W motor(rated speed 30-40km/h), you could choose 30-35A(limited current) controller. 

The higher speed get for motor(overvoltage condition), the bigger limited current should choose for matched controller, when considering the starting acceleration capability and climbing performance.

If you don’t how to match controller, please don’t hesitate to contact with ue. We could also provide suitable controller.

Square Wave Controller: Kelly Controller KBS48121.

Sine wave controller: HY Controller 48v35A

 

Motor Design of inner configuration

There are three types, Normal/V1 type (low cost), Export/V2 type (Cost-effective) and Extra/V3 type (Best Performance).

1. Comparison between V1 and V2.

Holder: Iron(V1), Aluminum (V2) Hall: One hall with Normal connector(V1), Two halls with Waterproof connector(V2) Stator: V2 have a stronger configuration, more cooper, thicker section surface, energy saving in usage. Magnetic Steel Grade: V2 ≥ V1 Efficiency:  84~87%(V1) 86~88%(V2) In short, normal type is standard configuration, while export type is high configuration. The price differs because of the cost of raw materials.

 2. Comparison between V2 and V3.

The raw materials are alike, main difference in inner construction. For V3 (16 Pole Pairs):  stronger configuration than V2, wider lamination, more cooper wire/phase wire and thicker Cross-sectional area section,  bear more current in usage. Magentic Steel: V3 is wider and thicker.  Efficiency:  86~88%(V2) 88~92%(V3) Thus, V3 have best performance.

Test Report

This test report for 10inch 205 48v 800w V2 motor.

  

CAD Drawing

  

For 10inch motor, we have 10x2.15inch and 10x3.0inch for your choice. The inner configuration is the same, only different on the installation for your tire. So you can choose the wheel size according to your tire model. Take an example, if your tire is 3.00-10, then you can choose 10x2.15inch motor.

Anyhow, if you don't know how to choose it, pls. feel free to contact with us.

About Factory 

Quanshun Motor focus on motor for more than 10 years, which is specialized in research,development and production of electric motor. We are located in Taizhou, with convenient transportation access.All of our products comply with international quality standards and are greatly appreciated in a variety of different markets through the world.

If you are interested in any of our products or would like to discuss a custom order,please feel free to contact us. We are looking forward to build successful business relationships with new clients around the world.

Choose QS, Choose Quality & Service!

More details about Quanshun:  http://qsmotor.en.alibaba.com/custom_page_1/About_QSMotor.html

Download for catalog, manual & sharing video:  http://qsmotor.en.alibaba.com/custom_page_2/Download.html

Motor Kit 

We could provide suitable controllers, freewheel, brake disc, throttle etc.

For the moment, we could not provide wheel set & Spokes.