Thermal Insulation and Heat Resistant Nomex Fire Fighter's Suit

* The fire fighter suits Starye manufactures takes advanced flame retardant Nomex Material.  The scientific design and quality manufacture ensures the life safety of fire fighters as much as possible.

* The fire fighter suits conform to China GA12-2002 standard, Europe EN469 and USA NFPA1971-2007. It is separated type, four-layer structure made of X-FIPER™ Nomex fiber, 3M, Japan Teijin Nomex and USA DBI etc. Wear-resisting design on neck, waist, elbow and knees, lining removable.

* Features of inflaming, moisture, thermal, ventilate, wearing resisting.

* Flame retardant aramid stitches. Stiches density:13 stiches every 3cm distance.

* Hydrostatic pressure≥50000Pa, Moisture permeability≥6151g/(m2.24h); oil repellency properties≥3 degree.

* Jacket details: A centered storm flap on the jacket with inside heavy duty zipper and outer Velcro fasteners for fast release, added protection and safety. The jacket length has a minimum of 35cm(13.8 inches) overlap over the trousers. The sleeve wrists have a closure that will prevent any fluids from entering. The jacket has a pocket designed for the storage of a portable radio. There have 5 cm width reflective strips on chest, hem, and cuff.

* Trouser details: The trouser is designed such that it fits the wearer firmly with a suspender and elastic waistband. It is equipped with two adjustable suspenders. It can enable the subject to wear the existing fireman boots with ease. There are 5 cm width reflective strips on the legs.

Features:

 Inflame retardant;
 Moisture & water resistant;
 Ventilate, thermal & heat resisting, wear resisting.

Performance:

This firefighting suit won't have any change or damage being burned by lighter within 5s;
It will begin to carbonize after being burned longer than 5s, but will never get fired;
When you take away the lighter after burning it for a long period, there might be a little spark onside but the spark will disappear within 0s;
The standard of thermal stability change rate is less than 10%, our fire suit’s thermal stability change rate is 1% which is qualified;
The stiches material is aramid when it burn will not melt and slip;
The shrinkage rate is less than 5%.
The outside layers breaking strength: vertical 1106N, horizontal 996.1N. The comfort layer breaking layers breaking strength: vertical 360.9N, horizontal 357.4N.
The tearing strength: vertical 183.7N, horizontal 145.2N.

The seam breaking strength: vertical 922.7N, horizontal 764.4N.
This suit can work normally in environment of 250℃for long time;
The performance of the suit might be worse than normal condition when the temperature reaches into 280℃, but can still work
When the temperature reaches 350℃ degree, the suit will begin to carbonize.

Technical data: