xxnx linear vibrating screen for sale 

 

Principle:

DZSF Linear vibrating screen is composed of a screen box, screen frame, vibration motor, damping system and mountings and other components. It is vibration motor as vibration source, fixed to the screen the same two boxes to do the opposite direction from the vibrating motor synchronous rotation, vibrating motor carried by the eccentric location in the rotation every moment of the centrifugal force generated by the pitch along the casting direction for reciprocating motion, so bearing in the shock absorber on the entire screen machine is linear vibration, so that the surface material was thrown up in the screen while moving in a straight line, the material from falling into the screen frame into the end materials, loose through the screen to complete the screening operations, in order to match the screen to achieve a reasonable screening purposes. Linear vibrating screen is a kind of international advanced level of small and medium multi-screening machines.

 

Features:

1) Continuous production, single or multi-layer auto-classification filtering

2) Good sealing performance, no dust overflow.

3) Energy-saving and low noise with vibration motor.

4) Start fast and stop smoothly

5) Simple installation, easy operation and maintenance

6) High utilization rate of screen, large unit area, not easy to block, but easy replacement of screen.

7) High-precision screening reach to 96% or above, large processing capacity.

 

Use and maintenance:
1, the machine shall be equipped with electrical protection device.
2, the machine is running early, check every day at least once a bolt to prevent loosening.
3, when the motor direction of rotation does not meet the requirements, you can adjust the power supply phase sequence.
4, the motor should guarantee good lubrication, each running about two weeks to add lithium grease (ZL-3) once, come on, through the oil by adding appropriate amount of lithium grease cup. When using sealed bearings, the motor is not installed on the oil cup.
5, the machine running total of 1500 hours, check the bearings, if serious injury should be immediately replaced.
6, the machine parked or garaged when used again after a long time, measure the insulation resistance should be used to measure 500-volt megger, should be greater than 0.5 MΩ.

 

technical parameters
 

DZSF Linear Vibration screen (Linear vibrating screen)
Model	Layer	Screen Surface Size(mm)	Screen Specification(mesh)	Particle Size(mm)	Capcity(t/h)	Power(KW)	Dual Amplitude(mm)	Vibration Time(times/min)	Sieve Surface Indination(°)
DZSF-612	1-6	600*1200	2-325	≤20	≤3	0.4*2	6-10	1460/960	0-10
DZSF-520	1-6	500*2000	2-325	≤20	≤5	0.4*2	6-10	1460/960	0-10
DZSF-525	1-6	500*2500	2-325	≤20	≤8	0.55*2	6-10	1460/960	0-10
DZSF-1020	1-6	1000*2000	2-325	≤20	≤12	1.1*2	6-10	1460/960	0-10
DZSF-1025	1-6	1000*2500	2-325	≤20	≤16	1.1*2	6-10	1460/960	0-10
DZSF-1030	1-6	1000*3000	2-325	≤20	≤20	1.5*2	6-10	1460/960	0-10
DZSF-1224	1-6	1200*2400	2-325	≤20	≤23	1.5*2	6-10	1460/960	0-10
DZSF-1525	1-6	1500*2500	2-325	≤20	≤28	2.2*2	6-10	1460/960	0-10
DZSF-1530	1-6	1500*3000	2-325	≤20	≤32	2.2*2	6-10	1460/960	0-10

 

Applications:

 

Chemical industry: resin pigment, medicine, grease, paint, palette, etc.

Metallurgy and mining industry: quartz sand, ore, titanium oxide, zinc oxide,etc.

Mechanical industry: casting sand, powder metallurgy, electromagnetic material, etc.

Food industry: sugar, salt, alkali, gourmet powder, starch, milk powder, yeast powder, pollen, food

additive, bean milk, juice,etc.

Paper-making industry: coated slurry, exhaust liquid, paper making liquid and  waste water reclamation, etc.

Abrasive material  and  ceramic  industry: building sand, mica, alumina, abrasive, slurry, refractory material, etc.

  

FAQ: 

 If you are familar with rice bran vibration screen, rice bran vibrating screen, please choose  the style and decks  directly.

 If not, please provide the following information of your material, so we can recommend the suitable sieve machine for you.

 1.Material: 

  -Material name:_____

  -Feeding size:_____mm

  -Material density:_____t/m3

  -Material distribution:_____%

 

  -Separation destination:_____

2.Screen machine

  -Capacity:_____t/h

  -Screen deck: _____ 

3.Particle size distribution of each layer:  

  -Opening size:_____mm

 

  -Construction material:_____

 

A lot customers only knows the micron term and don’t know the meaning of mesh when purchasing a rotary vibrating screen. In fact, the conversion of micron into mesh is simple. Let’s PK Machinery explain the specific conversion method. 

 

At first, let’s us briefly understand what is mesh definition. The mesh refers to the number of inches of screen holes per square. 50 holes per square inch refer to the 50 mesh. The bigger the number of mesh means the more holes per square inch. Besides, it also used to express the screen mesh particle size. The higher the number of mesh means the smaller the particle size. 

The powder particle size is known as particle size. The granularity means particles can pass through the screen mesh size with 1 inch (25.4 mm) the number of mesh width of the screen mesh representation is known as mesh. There is no unified standard size of powder technology in the world. Each enterprise has its granularity index definition and representation. Different country has different screen size. Hence, it is difficult to be standardized.