Description

DVI over fiber convertor adopt the most advanced international technology of digital video and optical fiber transmission, performing synchronous, undistorted, uncompressed and high quality signal transmission. The computer host, high definition vedio signal etc, exporting the long distance of various resolution ratio of 1 channel DVI signal, solve the problem of only for short distance transmission.

All digit, no-compress, high definition optical transmission

Support 1 channel DVI high definition vedio transmission

Support UXGA 1600*1200/WUXGA 1920*1200@60Hz, HDTV 1080p 1920*1080@60Hz resolution ratio, the max bandwidth 4.95Gbps.

  DVI optical transceiver using LC 4 core optical fiber transmission RGB data and Clock Clock signals, the resolution up to 1920 x 1200 @ 60 hz, the signal transmission can be single mode or multimode fiber 20 km, 550 meters. Connect the transmitter before use on the monitors will be used, click on the transmitter key, to read and write EDID will be read and stored in the display inside the transmitter, the EDID programming itself so that it is able to adapt to the characteristics of different resolution of display system, make its use more concise, convenient and reliable.

SPECIFICATION

Opitcal：

 

Wavelength	850nm & 1310nm
Output Power	-8~-3dBm
Optic fiber	50/125u multimode，62.5/125u multimode，9/125u single mode
Rx sensitivity	-22dBm
Optical connector	4 x LC
Distance	0~550M (MM)  /  0~20KM  (SM)

 

Video:

 

DVI Input/Output
Output video	DVI 1.0
Input video signal	0.5～1.0V P-P
Input signal DDC	5V P-P (TTL)
Connector	DVI-I
General：
Input Power		5 V DC
Power consumption (maximum)		2W(max)
Operating temperature		-20°C to 70°C
Storage temperature		-40°C to 85°C
Operating humidity		0 ~ 95% (non-condensing)
Net Weight		800g per pair
Case material		Aluminum

 

Equipment installation and operation

Step 1:Turn on the PC and the monitor power.

Step 2: read the EDID monitor, read methods please follow the steps below:

(1) first connect the 5 v power adapter to the transmitter, ensure the power light red LED lights up.

(2) open the monitor power supply, then connect the transmitter DVI interface launch to the DVI interface display device.  

(3) press the transmitter EDID read/write button, the EDID R/W light lights up, says it is to read the EDID information display device. Indicator light goes out after 10 seconds said read EDID information is completed, switch off the power of the transmitter.

Step 3: first connect the 5 v power adapter to the transmitter, ensure the power light red LED lights up, connect the transmitter DVI interface to the PC of the DVI interface.

Step 4: connect the 5 v power adapter to the receiver, to ensure that the power light red LED lights up. Connect the DVI port of the receiver and display.

Step 5: according to the chart will be LC fiber optic connections,

When the 4 core fiber one one corresponding connected, Receiver green lights 1~4 lights up; DVI signal after connecting the Link indicating lamp also lights up.

For example, large screen splicing applications：

The transmitter can be installed in 19 inch 2U rack-mount chassis， connected multi image processor, after fiber transmission, independent receiver connected with the splicing screen.