Input

AC 110V ±50/60 Hz or AC 220V ±50/60 Hz

Equipment power varies with the output power

Output

Voltage

0.5% - 100% FS (Full Scale), ±0.1% FS

* ± 0.05% FS accuracy provide for current range lower than or equal to 6A. For 6A system, additional current range of 100mA is provided.

Minimum discharge: 2.5V

*0V could be reached as an optional choice.

Current

0.5% - 100% FS (Full Scale), ±0.1% FS

Resolution

AD: 16bit; DA: 16bit

Data Acquisition

Frequency

10Hz

*100Hz Optional

Mode

Time Interval Δt: supported max frequency to 60000 seconds

Voltage interval ΔV:     0.2% - 100% FS

Current interval ΔI: 0.5% - 100% FS 

*You can set one of or all three conditions, but data cannot be recorded beyond its capability.

Response Time

20 ms

*10ms for current range lower than or equal to 6A.

Operation Mode

Charge

Constant Current, Constant Voltage, Constant Power

Discharge

Constant Current, Constant Power, Constant Resistance

Simulation

Constant Current, Constant Power

*Simulation data loaded through a 2-columned file in excel or txt format. Time interval should be 500ms or above.

End Conditions

Voltage, Current, Step Time, Capacity, Energy

*Only Voltage and Step Time be valid under Simulation mode.

**-ΔV is supported additionally for discharge mode.

Channel Control

Independent, 4-wire connection

Step Editor

Cycles

65535

Steps

254

Loops

Max 3

Step Time Format

00:00:00.000 (h:min:s.ms)

*minimum 500ms at an increment of 100ms.

Input Impedance

≥1MΩ

Noise

<85dB

Hosting Computer

Basic requirements

2.4GHz, 2G DDR2 800, 500GB SATA, Ethernet Port ,Windows 2000 or above

Other

UPS

Environment

Operating

15℃~40℃, ≤70% RH

Storage

-10℃~50℃, ≤80% RH

Battery Holders

Universal holder / Alligator / Polymer / Ring terminal / Other specified available

Dimensions