The K&S Metals Ladder head roller, stability and safety devices are made of extruded twin cavity square section aluminium to ensure light weight and strength. All joints are welded and braced to ensure strength and safety. Pictured is the 6” stand off. 

Attachment to ladders is achieved in seconds unlike most other devices which require nuts and bolts. 

The specially moulded NBR Rubber “Safe T Squeeze Wheels” are set on square nylon hubs.  These are 5” wheels as compared with the standard 3” ones. 

The design of the wheels and hubs ensures they squash flat when weight is applied to the ladder.

 This ensures a much better grip of the wall whilst an operator is on the ladder and the wheels make erection of the ladder very simple with minimum marking of the wall when sliding the ladder up and down. 

The specially designed springs and hooks securely but also simply affix the device to the rungs of the ladder.

 Weighing in at 2.2Kg this device is available powder coated in any colour (depending on order quantity).