24v 120w switching power supply ac dc 110/230v input

Model:	S-120W
Brand:	JH
Origin:	Made In China
Category:	Electronics & Electricity / Power Supply & Distribution / Switching Power Supply
Label:	24V power supply , 120w power supply , power supply
Price:	-
Min. Order:	100 pc

Inquire Now

Product Description

Features :

• AC input range selectable by switch

• Protections:Short circuit/Over load/Over voltage

• Cooling by free air convection

• 100% full load burn-in test

• Fixed switching frequency at 83KHz

120W 24V switching power supply 24v 5a

Model		S-120-5	S-120-7.5	S-120-12	S-120-15	S-120-24	S-120-48
Output	DC Voltage	5V	7.5V	12V	15V	24V	48V
	Rated Current	24A	16A	10A	8A	5A	2.5A
	Current Range	0~24A	0~16	0~10A	0~8A	0~5A	0~2.5A
	Rated Power	120W	120W	120W	120W	120W	120W
	Ripple & Noise (max.) Note.2	100mVp-p	125mVp-p	125mVp-p	125mVp-p	150mVp-p	150mVp-p
	Voltage Adj. Range	4.5~5.5V	6.75~8.25V	10.8~13.2V	13.5~16.5V	21.6~26.4V	43.2~52.8V
	Voltage Tolerance Note.3	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Load Regulation	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Setup,Rise time	1000ms, 30ms at full load
	Hold time (Typ.)	20ms at full load
Input	Voltage Range	88 ~ 132VAC/176 ~ 264VAC selected by jumper or switch 248 ~ 370VDC
	Frequency Range	47~63HZ
	Efficiency(Typ.)	76%	78%	80%	81%	83%	84%
	AC Current(Typ.)	3.15A/115VAC 1.5A/230VAC
	Inrush Current (Typ.)	COLD START 20A/115VAC 40A/230VAC
	Leakage Current	<1mA / 240VAC
Protection	Over Load	105 ~ 150% rated output power
	Over Load	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	5.75 ~ 6.75V	8.63~10.13V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V	55.2~64.8
	Over Voltage	Protection type : Hiccup mode, recovers automatically after fault condition is removed
Environment	Working Temperature	-10 ~ +60°c (Refer to "Derating Curve" )
	Working Humidity	20~90% RH Non-condensing
	Storage temp.& humidity	-20~+85°C, 10~95%RH
	Temp. coefficient	±0.03%/°C (0~50°C)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4.)	Safety Standards	UL1012, UL60950-1, TUV EN60950-1, CCC GB4943 approved
	Withstand Voltage	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/ 25°c / 70% RH
	EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
	EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
Others	MTBF	314.9K hrs min. MIL-HDBK-217F (25 °c)
	Dimension	1999838mm (LWH)
	Packing	0.65Kg; 20pcs/14.2Kg/0.8CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.