Materials: 304 304L 316 316L

　　Features: acid-resisting,alkali-resisting,heat-resisting,corrosion-resisting

　　Applications: Stainless steel wire mesh is widely used in chemical industry, environment protection, mine industry, airspace industry, paper-making, electronic industry, metallurgy industry, food industry, pharmacy etc.

　　Weaving Pattern: Plain weave and Twill weave

　　1) Weaving Styles:

　　Weave style describes the ways the wires cross over and under each other.There are two common weave styles: plain weave and twill weave.

　　Plain weave: Each wire alternates—first going under one wire,then going over the next wire.Plain weave is the most common weaving style.

　　Twill weave: Each wire goes over and under two wires in succession.Twill weave is often used when wire diameters are too large to allow a plain weave.

　　Other types of weave are available by special order.


　　2) Wire Diameter:

　　Wire diameter is to measure the thickness of the wires in the wire mesh.Warp and Weft wires may be the same diameter,or cross or line wires may have a different diameter (typical in wire mesh used for filtration). If possible,please specify wire diameter in decimal inches instead of wire gauge.

　　3) Mesh Counts:

　　Mesh is the number of openings per lineal inch.Mesh is always measured from the centers of the wires.

　　When mesh is greater than 1 (that is, the openings are greater than 1 inch),mesh is measured in inches. For example, a two-inch (2") mesh is two inches from center to center. Mesh is not the same as opening size.

PACKING:packed in roll by paper tube,water-proof paper inside then plastic film,wooden case outside fixed by steel belt