Features:
1. High work speed & big current
2. Less than 1mΩ contact resistance, no noise
3. Compact structure, easy installation and smooth operation
4. Free maintenance and more durable than traditional slip ring
5. Apply to any rotating device to transmit various signal and power
6. Non-mercury slip ring is optional ( Conform to CE, RoHs certification )
7. Stainless steel and aluminum alloy housing is optional
8. Contact pin and lead wire installation is optional
Application:
1. Rotating table, rotating camera and ratary lamp box
2. Cable wheel, winding machine
3. Resistors cutting machine
4. Robot arm
5. Wind turbine generator
6. Medical equipment, spinning LED sign board
7. Manufacturing and handling control machine
Notice:
1. Not exceed the max temperature 60℃(140°F ), ambient temperature + self heating.
2. Vertical mounting and storage should keep the U P in the up direction.
3. Mounting into a shaft should keep no eccentricity.
4. Do not solder on the connector and terminal.
5. Connect the connector on the terminal only a few times, losing connection will cause heating when apply electrical power.
6. Vibration will cause service life shorter.
7. The rotary connector can be mounted by the body or plastic collar, but it can not carry mechanical loads. Another end should be connected floating hold by electric wire.
8. The uppers notice should be kept, otherwise, it will cause the rotary connector failure or shorten service life.

A3M    1 circuit@ 30A; 2 circuit@ 4A    250VAC/DC    1800RPM    -30℃-+60℃