The principle of a splitting machine 
 
Splitting machine, also known as rock splitter, split rock machine, is based on ultra-high hydraulic power is woven of cleavage gun and move forward, and make the chopping block on both sides of the outward expansion, after physical amplification, produce 500 tons of division force, the rocks split. 
 
The composition of the splitting machine: 
 
Hydraulic power station, a transport plane, tubing and related connector, much cleavage gun (quantity can be according to customer's need and configuration, can take up to ten 
 
Three splitting machine's main areas of application: 
 
1 pit, hole pile, foundation rock crushing: 2 tunnel excavation, holes mining: 3 road, pile head concrete demolition: 4 mining, rock secondary decomposition: 5 rock broken in the demolition project 
 
 
 
A, quarrying and mining industry 
1, the large size of crude stone mining; Can be realized on thousands of cubic meters of a block. 
2, large block segmentation; 1 cubic meters of the following is a production can be realized. 
3, remove large pieces of waste rock, flat field. 
Second, the construction project 
1, the tunneling. 
2, underground mine roadway are extended. 
3, highway functional hole, tunneling. 
4, the subway tunneling. 
5, the tunnel excavation. 
6, underground artificial river mining. 
7, pipeline tunnel excavation. 
8, artificial river, rock digging ditches. 
9, foundation excavation. 
Three, demolition project 
1, the removal of concrete and reinforced concrete. 
2, old houses demolished. 
3, the old building demolition. 
4, the old bridge pier demolished. 
5, return the removed. 
6, chimney demolition. 
7, underwater. (1) clear channel. (2) the underwater demolition of the building. (3) clear port of underwater structures. 
Four, chemical industry, metallurgical production and overhaul project. 
1, smelting furnace overhaul. 
2, electrolytic aluminium electrolytic cell overhaul. 
3, all kinds of furnaces refractory material of demolition of building engineering. 
4, carbon block broken carbon plant. 
Five, all kinds of disaster relief. 
1, mining accidents, fires, landslides, floods and other cleanup. 
2, railways, highways large traffic accident emergency rescue work 
 
 
 
Cleavage gun operation parameters. 
 
model 
The aperture (mm) 
Chopping block length (mm) 
Drill hole depth 
The rated working pressure (mpa) 
Actual division (T) T 
Weight (KG) 
Split distance (mm) 
Using thicker chopping block split second distance (mm) 
80 
40 and 42 
150 
350 
60 
500 
25 
10 to 18 
18-100. 
42 
250 
500 
44-46 
350 
600 
46-48 
450 
700 
90 
40 and 42 
150 
350 
60 
650 
30 
18 
18-100. 
42 
250 
500 
44-46 
350 
600 
46-48 
450 
700 
105 
48-50 
350 
700 
60 
750 
34 
18 
18-100. 
 
Splitting move station classification: 
 
Type 1, electric and diesel type two kinds. 
 
Power points: 1.5 KW, can only get a splitter. 380 v voltage, three-phase electricity. Please note. 
 
4 kw, the splitter can take up to 9. 380 v voltage, three-phase electricity, please note 
 
Diesel power station power: 7.5 horsepower, the splitter can take up to 9. 
 
Diesel power station, startup mode, divided into electric start, and hand pull two station, 
 
2. Preparation of the operation steps: 
 
1. The injection of hydraulic oil. In splitting move standing inside the cylinder of 46 # or # 68 anti-wear hydraulic oil injection to oil standard position. 
 
A. general with two-thirds of oil standard position for the standard. 
 
B. in the cold winter weather 46 # anti-wear hydraulic oil, it is best to use in the season of warm weather can use 68 # anti-wear hydraulic oil. 
 
C. work should be kept in the cylinder of hydraulic oil clean and pure, avoid because of the hydraulic oil into the impurities affect the use effect of splitting machine, even cause the clogging in the tubing. 
 
D. hydraulic fracturing machines in a frequently used condition, had better be replaced every six months to a year anti-wear hydraulic oil. In splitting the captain time when not in use, it is best to pour oil cylinder of the hydraulic oil, stored separately. 
 
2. Check the power supply. Type electric splitting machine must check the power cord and voltage, and diesel version splitting machine must check standard diesel oil injection. 
 
3. Check the oil pipe connection. Check the oil pipe joint connection is firm, and straighten out the tubing. 
 
 
3. The operation steps of the process: 
 
1. With a pneumatic drill on the rock or concrete need forcible entry set split point and drilling. 
 
2. Open the power station, turn the power on manual valve to the work gear Ⅰ # or # Ⅱ bits, at the same time open all the manual valve to work on the splitter gear Ⅰ # or # Ⅱ, to determine the direction of splitter wedge. 
 
3. Insert the splitter of the rock or concrete hole, open the manual valve gear, began to split. 
 
A. single splitting section of 1.5 square meters or more. 
 
B. it is hard rock, tensile sex more fragile, fracturing effect is better. 
C. splitting time 8 seconds at a time. 
The hydraulic splitting machine characteristics 
 
1. The products are portable, simple operation, use safety. Splitting valued quantity is around 25 kg, single person can easily homework; A single manual valve control, ordinary workers can skillfully use after operation time; Work process does not produce dust, noise and vibration, so very safe. 
 
2. The mature technology, reliable quality. Strong scientific research strength, and provides a strong support for the continuous upgrading of product improvement, hydraulic fracturing machines now is our company's sixth generation products, product quality has reached international advanced level. 
 
3. High working efficiency, and cost performance. Hydraulic fracturing machines single shot nearly 500 tons of splitting strength, a splitting section can reach more than 1.5 square meters, more than splitter of thousands of tons of splitting strength, 10 seconds can split a boulder, and compared with the similar products abroad, performance outstanding.