Modbus to PROFIBUS PA Gateway G0307

G0307 (original model no. is NCS-MP105) is PROFIBUS /MODBUS protocol gateway, the address of the PROFIBUS-PA slave, MODBUS RTU master. It's a new product of our company and will be put onto the market soon.

  

Product Description

• G0307 is converter for interfacing Modbus- RTU instruments to a Profibus PA network.
• Support PROFIBUS DPV1 and PROFIBUS PA 3.01
• Support AI, AO, DI, DO standard function blocks
• Support GSD5.0 and standard EDD
• Support standard DD or EDD specification
• Electrical interface connected with MODBUS device supports TTL level, RS485 and RS232
• Able to provide 3.3V or 5V power supply output

  

 

 

NCS-MP105 is a converter device for MODBUS- RTU protocol to PROFIBUS PA protocol. It is able to integrate device/board with MODBUS communication interface to PROFIBUS PA bus system. Bus power supply is selected by NCS-MP105, and NCS-MP105 can provide power supply to the boards the user provides.

 

 

As a MODBUS host, NCS-MP105 communicates with the device with MODBUS-RTU interface, it can achieve read/write operation for MODBUS register data via PA transducer blocks, and convert MODBUS data to PA communication system via PA standard AI,AO,DI,DO function blocks.

 

 

NCS-MP105 Application:

• Gas detectors
• Analyzers
• Positioners
• Any smart device with MODBUS protocol

 

Physical Parameters

Bus signal: compliant with IEC61158-2 physical layer standard

Bus power supply: 9 ~ 32V

Operating temperature: -40 ~ 85°C

Static current: ≤14mA

Humidity range: 5% ~ 95%,non-dew

Mechanism size: diameter 66mm(can be customized)

 

Supportive MODBUS Communication Parameters

Address: 1 ~ 255

Baud rate: 9600 / 19200 / 15625 / 31250 /62500 / 125000 bps

Data bit: 7 / 8 bits

Calibration: odd / even calibration

Stop bit: 1 / 2 bits

CRC calibration: low byte ahead / high byte ahead

Data format: support various data formats

 

Supportive MODBUS Function Code

Function Code 1: read loop status

Function Code 2: read discrete input status

Function Code 3: read keeping register value

Function Code 4: read input register value

Function Code 6: write loop

Function Code 16:write multiple register values