I.Main Technology parameters:
Item unit 405×2200
Feed paper size mm 1200×2400
Effective printing mm 1200×2200
min. printing size mm 320×700
printing plate thickness mm 5
Top speed Sheets/min 140
economic speed Sheets/min 110
main motor power KW 22.5
weight T 19
Precise color precision mm Four color±0.5
boundary dimension mm 9000×3900/4200×3200

II.Paper feeding unit
NO Item Specification
1 Machine unit separation and locking up （1）Electric control the separation or locking up and equipped with alarm .Ensure that personnel safety
（2）Transmission shaft with friction type clutch, Avoid error operating while damage machine.
（3）Pneumatic type chain device.
（4）Main engine motor startup protection device.
2 Pushing
type
paper feed
system （1）Induced draft Auxiliary to deliver the paper, Suction fan 5.5~7.5KW. According to the cardboard bending of the different conditions. Adjusting suction. Guarantee for paper smoothly.( frequency converter control air quantity)
（2）Stainless steel pipe to deliver the paper，and cardboard friction small. Cardboard conveying unobstructed.
（3）Support paper claw adopts cylinder pushing, fast and save effort.
Die-cutting unit installation chain control switch, control abrupt stops to deliver the paper.
（4）Push the cardboard use aluminum alloy material and equipped with Alloy steel pushing paper block, wearable and lightweight.
（5）.Baffle clearance before、Side platens、Push cardboard position for electric adjustment.
（6）counter，settings、display production quantity.
（7）adopt automatic aligning paperboard device
3 Lead edge feeder
(1)Induced draft Auxiliary to deliver the paper, Suction fan 5.5~7.5KW. According to the cardboard bending of the different conditions. Adjusting suction. Guarantee for paper smoothly.
(2)Can choose, America, Italy, Taiwan lead edge feeder (sun feeding) system.
4 Dust removal device Brush dust removal equipment, can eliminate cardboard on printing impurities. Improve printing quality.
5 Feeding paper roller
(1)405 Outside diameter for 163mm.
(2)The paper-feeding roller is wrapped with wear rubber and subject to balance alignment.
(3)The lower paper-feeding roller is empaistic and chromeplated.
6 Auto return to zero device
(1)Paper-feeding unit, printing unit, slotting unit, mould cutting part auto zero.
(2)Use auto zero device, the position can be correctly adjusted by means of trial printing two pieces of cartons, thus reduces the waste of cartons.

III.printing unit
NO Item Specification
1 Printing roller （printing plate） （1）Outer diameter: ￠395mm(include plate ￠405mm)
（2）Steel pipe surface treated by grinding, chrome plated.
（3）Balance adjustment treated, make running steady.
（4）Ratchet fixed type roll up plate roller.
（5）Full plate + half plate hanging plate groove, suitable for 10mm×3mm hanging strip.
（6）Install and uninstall plate, Footswitch electric control obverse & reverse moving.
2 Printing pressure roller (1)405 outer diameter ￠163mm
(2)Steel pipe surface treated by grinding, chrome plated.
(3)Balance adjustment treated, make running steady.
(4)Printing pressure roller space dial manual adjustment, adjustable range: 0-12mm
3 Feed roller
(Upper and Under roller) (1)Upper roller: outer diameter ￠85mm thick-walled steel pipe, equipped with 2 paper feeding ring.
(2)Under roller: 405 outer diameter ￠163. thick-walled steel pipe, surface plated chrome.
(3)Paper feeding roller space dial manual adjustment, adjustable range: 0-12mm
4 Steel Material ANILOX Roller (1)405 outer diameter ￠197mm
(2)Steel pipe surface grinding, embossing, plated chrome.
(3)Balance adjustment treated, make running steady.
(4)Mesh quantity : 180, 200,200, 220
(5)Auto up and down device. ( when paper feeding the anilox roller downward connect with the printing plate; when stop the feeding, the anilox roller upward separate with the printing plate)
(6)Anilox roller equipped with sprag clutch, for convenience ink distribution and cleaning.
5 Rubber Roller (1)405 outer diameter ￠193mm
(2)Steel surface enclose hard-wearing rubber, Balance adjustment treated.
Rubber camber specially grinding, good ink transport.
6 Phase adjusting device (1)Planet gear structure
(2)Printing phase adopt electric digital type 360o adjustment.
(3)Manual adjusting transverse position, adjustable distance 7 mm
(4)Auto restoration system after clean printing plate
7 Water base Ink cycle (1)Pneumatic Diaphragm Pump, supply ink steady, operation and maintain easily.
(2)Equipped with ink filter screen, filter impurity.
(3)Steel material chromeplated ink fountain.
8 Printing phase fixed device (1)Air cylinder type brake structure
(2)When machinery separate or adjusting phase, the brake device control the machine moving, keep the position of the gear fixed.


IV.Die-cutting part
NO Item Specification
1 Die-cutting knife roller (down) (1) 405 outside dia. ￠357.4mm.
(2) Cast steel material surface grinded, chrome plated.
(3) Balance adjustment treatment, increase running stability.
(4) Cutting die fix the space between screw holes 100mm×80mm
(5) Suitable for cutting die height: 25.4mm
(6) wooden die thickness: 13mm
2 Rubber
mat
roller
(up roller) (1) Outer diameter: ￠404.9 mm
(2) Cast steel material surface grinding, hard chrome plated.
(3) Balance adjusting treatment, increase running stability.
(4) Cutting die fix the space between screw holes 100mm×80mm
(5) Suitable for cutting blade height: 25.4mm
(6) Wooden die thickness: 13mm
3 phase adjust device (1) Plant gear structure
(2) Die-cutting phase adopt PLC, touch screen and electric digital 3600 adjustment. (Adjustment can be done while machine running or stop )
(3) Manual control horizontal movement position, adjustable distance: 7mm

V.Stack part
NO Item Specification
1 Receive paper arm (1)Can chose manual type or automatic type
(2) Receive paper transmission belt, independent adjusting tension, not be subject to the equal length belts of limit.
2 Receiver worktable
go up and down (1) Strong Force chain transmission
(2) Stacking height: 1600mm
(3) Transmission motors attach brake function, make the worktable on the fixed position, and will not glide.
(4) Add assembly heavy iron device, make the worktable under control, and ensure the safety of workers.
(5) Flat wrinkle climbing belt, for prevent cardboard sliding.
3 Receive paper
baffle (1)Pneumatic receive paper baffle, when the cardboard stacking to presupposed height, the pallet will reach out automatically, then receive the cardboard.
(2)Back baffle position adopt manually adjustment.