Misumi Shot Counters For Plastic Molds

Our Shot/Mold Counter View positively monitors mold activity, validates process monitoring data,and assists mold maintenance procedures.

1, Bore the holes for the counter and actuator rod to the dimensions shown in the figure below, from the rear of the movable mold plate.

2, Slot an opening for the display panel of the counter to the dimensions shown in the figure below.

3, Screw the actuator rod into the plunger and insert the counter from the rear of the mold plate.

4, Ensure that the actuator rod protrudes 4.0mm above the parting line.

5, Retain the bottom of the counter with the support plate.