Heat energy to burr machine is a kind of processing machinery, heat energy to the burr machine heat to the process is a process of the use of thermo chemical reaction process. After the required deburring parts, placed in sealed inside the studio and filling it with a certain amount of methane (CH4) or gas and oxygen (O2) gas mixture, the spark plug ignition, gas mixture in the instant reaction, release a lot of heat, so that a burr under high temperature (about 30 DEG C), hypertension (the inflation pressure of 20 times), affected by high speed (8 times the speed of sound), spontaneous combustion of heating to deburring. Because of the short reaction time (only 0.003 seconds), so after processing parts of the original size, surface roughness, microstructure and mechanical properties did not change basically.
Due to the accessibility of gas, pervasive, so the shape complex or hand it is difficult to remove the burr parts, such as burr hole and cross hole groove, such as blind hole parts with unique removal effect, the device has the advantages of small volume, high efficiency (a cycle of 90 seconds), to the hair lunge effect good, can meet the needs of a large number of production needs, widely used in mechanical, hydraulic, pneumatic, die casting, automobile, aviation and other fields.