Product Decsription:

1) SK6812 Strip is powered by a 5V power supply (not included) and is controlled by a single data line from a suitable controller (not included).

2) 3-pin JST connector included: Red:VCC, Blue:GND, Green:DATA.

3) The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry.

4) Strip can be cut between every LED to create custom lengths.

50 Do not bend strip sharply. Do not exceed 2 meters in a single circuit. Longer runs should be powered from both ends to reduce voltage drop.

Products Application:

SK6812 dream color strips can be used for hotel, KTV, bar, game room and other leisure, entertainment decoration to heighten the atmosphere, car chassis, car decoration, shop decoration, home decoration and other decoration.

Specification for LED Strip:

Strip Voltage: DC 5V

Emitting Color: RGB Multicolor

Viewing Angle: 120°

Number Of LEDs: 60PCS/m

Number of ICs: 60PCS/m

LED Type: 5050 SMD

PCB Width: 5.5mm 

Waterproof Rating: IP30(Non-Waterproof)

Every LED cuttable without damaging the rest strips, according to your requirement