Diesel Engine Asset Management System.

• Entry level cost effective control panel for small to medium size diesel engines.
• Engine push button Start and Stop. With over crank protection.
• Bi-directional remote telemetry connection to PLC and SCADA networks and to a website via Satellite or a GSM modem.
• A Bright graphical display showing all engine data including warning/faults. RPM battery voltage and engine hours are also shown.

• Complete engine protection on low oil pressure switch and high engine temperature switches. Includes low radiator coolant level detection and overspeed engine shutdown.
• Robust IP66 control module in a powder coated enclosure with vibration isolators.
• Engine speed control via CANBUS J1939 for electronic engines. Not available on mechanical engines
• Programmable 100hour run timer. Set it, start the engine and walk away.
• Spare digital inputs.

• One panel to suit mechanical engines or electronic CANJ1939 engines.
• One panel to suit mechanical engines or electronic CANBUS J1939 engines.
• I/O Expansion Capable.
• In built data logging on all engine faults.
• Easy to set up and program. Will permit future software upgrades via a computer.

Reduce Your Operating Costs & Increase The Engine's Life Cycle?

The K17 engine controller is designed for the off-road stationary diesel engine market. It is a cost effective entry level control panel. The controller’s primary function is the management of your diesel engine. The software and hardware are designed to be simple and easy to use. The K17 is primarely designed for the following applications: Waste water, de-watering, irrigation pumping, power generation, air compressors, high pressure cleaners, lighting towers, dust suppression pumping, tank filling, sewer bypass, frost control and fire pumps.

Works With A Wide Range Of Diesel Engines.

The K17 is suitable on both electronic and mechanical engines. On electronic engines pressing UP/DOWN arrows can increase the speed. Mechanical engines must be controlled with a mechanical throttle cable. This controller is suitable for use on the following engine brands: Caterpillar, Cummins, MTU, Detroit, Perkins, Deutz, Hatz, Scania, Kubota, Yanmar, JCB, Lister and various engines from Asia.

Telemetry Connection Via (Satellite/GSM/GPS).

The controller's telemetry capabilities make certain you will always be connected to your asset via a smart phone, tablet or computer. You have the option of sending data to a 3G network or the option of a go-anywhere satellite network. Just choose the right Modem/Data package to suit your budget. PLC, RTU or SCADA users can also connect to the K17 controller. The control panel has inbuilt data logging capabilities and captures all shutdown messages.

Software Features

• Engine Hours Display (Hour Meter)
• Engine RPM Display & Over speed Protection
• Accepts Tachometer RPM Signal from:
• Alternator W+
• J1939 CANBUS ECU
• Magnetic Pick Up Over A Fly Wheel
• Engine Speed Control via CANBUS J1939
• Displays All Engine Fault Messages (J1939 included)
• Data Logs All Engine Fault Messages
• MODBUS (RS232/485) Communication

• Low Radiator Coolant Level Shut down
• Low Engine Oil Pressure Switch Engine Shut down
• High Engine Temperature Switch Engine Shut down
• Glow Plug Excitation (Requires High Current Relay)
• Battery Voltage VDC Display
• Low Battery Warning
• Loss Of RPM Engine Shut Down
• 100 Hour Programmable Stop Timer
• Programmable Digital Inputs
• Monitoring of Messages ONLY Permitted via Website.