Features and Benefits:
1/4JF features a built-in liquid strainer.
1/4JFN features built-in liquid strainer and liquid shut-off needle.
JBC features the center lines of the air and liquid inlet entering in the back of the nozzle and parallel to the spray projection axis.
JAC features air and liquid inlet connections entering the nozzle at 90° to spray projection axis.
JACN features air and liquid inlet connections entering the nozzle at 90° to spray projection axis and a shut-off needle.
1/8-2JAC dual spray assembly features two opposing spray set-ups with the air and liquid inlet connections perpendicular to the spray axis.
The JC multiple swivel spray assembly features each spray set-up mounted on its own swivel body. One or two bodies may be used and each can be rotated 360° to the desired position.
1/8JACM miniature assembly body is only 13 mm thick with a 29 mm by 32 mm rectangular face. The tip of the nozzle projects from the face a maximum of 30 mm depending upon the spray set-up used.
JCL multiple spray assembly (cluster type) features five spray set-ups located on the faces of the assembly or four set-ups located on the side faces.
2J is a dual spray assembly with opposing spray set-ups perpendicular to opposing air and liquid inlets.
JTN Thin wall adapters add an adapter locknut and gasket to thick wall adapters to provide secure mounting in thin walls and include locknut and gasket.
JTC Thick wall adapters replace retainer rings on nozzle assemblies and fit into threaded wall openings, holding the nozzle securely in place.