All the JL-230 series receptacles are intended to be pre-mounted onto those lanterns designed to fit an ANSI C136.10-1996 twist-lock photocontrol.
Both JL-230-16 and JL-230-14 have been recognized by UL to applicable US and Canadian safety standards, under their file E188110, Vol.2.
| Model No. |
JL-230-16 |
JL-230-14 |
| Rated Voltage |
480VAC Max. |
| Loading Capacity |
15Amp Max. |
| Ambient Temperature |
-40ºC ~ +70ºC |
| Holding Cover |
Polycarbonate |
| Receptacle |
Phenolic (Bakelite) |
| Contact |
Brass / Phosphor Bronze |
| Gasket |
Silicon Rubber |
| Overall Dimensions (mm) |
65mm (Dia.) x 30mm (H) |
| Lead Guage |
AWG#16 |
AWG#14 |
Disconnect power; wire the receptacle according to the diagram in right hand. An arrow indicating NORTH on the top of the receptacle is used to assist correct direction. Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as indicated on the top of the photocontroller.
Adjust the receptacle position by loosening screws and fasten them after its redirected.
