Flange butterfly valve

Model:	D341X-16
Brand:	Outshine
Origin:	Made In China
Category:	Industrial Supplies / Machine Hardware / Valves
Label:	flange valve , rubber valve , gear valve
Price:	¥20 / pc
Min. Order:	5 pc

Inquire Now

Product Description

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

The double flanged butterfly valve is mainly assembly by valve body, valve disc, shaft, seat and actuator. 90℃ open & close rapidly and the torque is samll, easy to operate. The valve seat is vulcanized on the valve body and can make the valve body completely separated from the medium , can be used in bad environments and have long service life.When the valve is closed, bi-directional zero leakage.

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Product Specification: DN50-DN220(2’’-88’’)

1.Features:

2. Compact construction results in low weight, less space in

storage and installation.

3. Central shaft position, 100% bidirectional bubble tight shut

off makes installation acceptable at any direction.

4. Full bore body gives low resistance to ﬂow.

5.No cavities in the ﬂow passage, easy to clean and disinfect

for potable water system etc.

6.Liner creates seal with mating ﬂanges so no media is in

contact with the valve body.

7. ISO 5211 top ﬂange for easy ﬁtting of actuators.

Low operating torques results in easy operation and economical actuator sizing.

8. PTFE lined bearing on shaft allows for low friction & wear

9. without using lubricants.

10. Lining bonded to the body to ensure no corrosion between body and lining, longer life, suitable for vacuum service, eg. at the suction side of the pump, suitable for end of line use.

11.Inserted lining to the body, liner easy to replace,

12.Function:

Isolating valve (on/off), regulating valve. Double ﬂanged butterﬂy valve can be used at end of pipe line, maximum pressure not larger than 50% of the rated pressure.

Member Information

Tianjin Outshine Valve Co., Ltd
Country/Region:	Tian Jin - China
Business Nature:	Manufacturer
Phone:	15822806929
Contact:	Sophia Wang (Sales Manager)
Last Online:	23 Jun, 2016