Single-Channel video+audio+data+Ethernet over One single fiber

Transmitter: NT-D110R-E-T

Receiver: NT-D110R-E-R

Product Characteristic

One Channel Un-compressed CCTV video over one fiber.

8-bit video processing, Compatible with NTSC, PAL, or SECAM CCTV, Instantaneous Transmission.

One Channel Ethernet, Supports 10/100BASE-TX, IEEE Std.802.3.

Digital multiplexing technology.

Support analog Audio, RS-485/232 data, Contact closure and Ethernet over one single-mode fiber.

24-bit audio processing.

Transparent transmission for multi protocol data formats.

Sketch map of connection

Technical indicators

Video

Channels:1 simplex

Input/Output Signal: 1.0 Vpk – pk

Bandwidth: 6.5 MHz                  

Video Sampling Rate:15 MHz

Signal-to-Noise Ratio: >58 dB

Input/Output Impedance: 75 ohms

Differential Phase: 0.7°

Differential Gain: <1%

Audio

Input Impedance: 47K ohms unbalanced

Output Impedance: 10K ohms unbalanced

Signal-to-Noise Ratio: >75 dB  

Audio Sampling Rate: 58 kHz

Bandwidth: 20 Hz to 20 kHz

Data

Formats: RS-232 (3-wire), TTL, RS-422, RS-485 (2-wire/4-wire) Transparent transmission for Manchester, Biphase, SensorNet

Baud Rate: 0 kbps to 115.2 kbps

Bit Error Rate: <1.0E-9

Ethernet           

10/100BASE-TX, CAT5 RJ-45,   IEEE Std. 802.3, Full Speed 10M/100M Ethernet duplex

Optical

Fiber Cable: Single mode

Optical Connector: FC

Emitter: FB or DFB

Wavelength: 1310 nm or 1550 nm

Transmission Distance can reach 100 Km

Environmental

Operating Temperature: -25°C to 75 °C

Maximum Humidity: 95% relative, Non-condensing

Mechanical

Dimensions: 170X110X47mm

Construction: Aluminum

Power Supply

Protection: Solid-state short circuit protection

External Power Supply, Input:100~240 V AC 50/60Hz   Output: 9 V DC, 4 A 

Electromagnetic compatibility

EMC Directive 2004/108/EC

EN60950-1:2006

Purchase information