Specifications:

IO input：32 
IO output：40 
Temperature checking：8 channel
Analog voltage output：4 channel(±10V)
Analog current output：3 channel（0~1A）
Analog voltage input：8 channel
RS422 : 1 channel
HMI panel：10 inch panel digital touchscreen
100MHz Ethernet : 1 

Features:

1、3 core processor inside，processing cycle：<150us；
2、FPGA inside,high-performance requirements can be customized design；
3、Mold position closed-loop control & Ejector position closed-loop control；
4、Servo vavle control system；
5、Supports Ethernet network interconnection and networking；
6、Digital touchscreen，with no drift and long lifetime

Selling Points:

1.Three core processor, processing the main loop to keep within 150us;
2.Using industrial grade chips, high temperature resistance, working environment temperature: -20~65℃;
3.Using F-RAM technology, user data does not need to save the battery, the permanent is not lost;
4.Can achieve low pressure, low speed and low radiation amount of control (0.1g);
5.Can achieve high pressure and high speed of thin-walled products control (the highest speed of 800mm/s);
6.The input and output functions can be defined, and the input and output functions can be selected on the screen;
7.Built in custom CPU, high performance requirements can be customized design;
8.The built-in switch die algorithm and control algorithm;
9.Built in servo valve control algorithm, the use of servo valve, no additional servo valve controller;
10.To support the Ethernet network interconnection and networking;
11.Support user data and mold parameters of the import and export, to facilitate the user to back up the data;
12.Digital touch screen, no drift, long service life;
13.Support the development of customized requirements, and provide second development interface;