Using Your Egg Incubator

1.Test your incubator to see if it functions properly.

2.Connect the egg turner plug to the control plug inside the egg compartment.

3.Fill one or both water channels depending on local humidity levels.

4.Set the eggs with the pointy side down.

5.Close the lid and switch on the incubator.

6.Press the reset button (left green button) to reset and start the day counter from “0”.

    (this will also rest the egg turning countdown back to 1:59)

7.Keep an eye on the humidity reading and fill the water channels when needed.

   (normally every 4 days)

8.At day 18 you should remove the tray with the turning mechanism and place the

    eggs on top of he bottom grid.

9.At the same time it is important to fill both water channels to increase the

    humidity. (this is very important to ensure that the eggshells are soft enough for

    the chicks to break through.)

 

Mini Egg Incubator Product Function

1.Automatic egg turner.

 2.High and low temperature alarm, high and low humidity alarm.

 3.Recorded days of incubation .

4.Top cover is transparent and easy to observe.

5.Automatic temperature and humidity control.

 

What you will find inside your packaging:

1.Foam protection

2.Incubator

3.Power cord

4.Instruction booklet