YN30A/YN30A-1

INTERNAL COMBUSTION ROCK DRILL

Product introduction: It is a small type of rock drill composed the Engine, Air compressor and Rock drill in one. It is powered by the small gasoline engine and used for drilling on the hard rock or rock with medium hardness. Because it is self-powered, it is especially convenient to be used for projects without other power supply, or projects that are inconvenient for conveying the large-volume unit, or for mobile construction projects.

Advantages:

1. YN30A/YN30A-1 handhold internal combustion rock drill is a hand rock drilling tool which integrates the small gasoline engine， compressor and rock drill.

2. Just 30kg weight for the main engine. Easy to carry.

3. It can blow off the rock powder in the blasting hole by the compressing air generated from itself.

4. Applicable for the areas of high mountain without power and air pressure equipment, especially for those temporary projects with frequent movement

5. Working on the rocks, available for vertical down drilling, horizontal drilling and up drilling with the angle of less than 45°. The max. Vertical down drilling depth can be 8m.

Applications:

1. Applicable for rock drilling.

2. If replace a few of the parts, it can also be used as a breaker and a rammer for various work of breaking, shovelling, excavating, splitting and ramming.

3. Wide applicability. Regardless of the high mountains, flat grounds, extremely the hot area with the temperature of +40℃and bitter cold area of -40℃, it can work in good condition.

Technical specifications