VOC Sensor Photo Ionisation Detector PID-A1                           

Model Number: PID-A1                                                

Notes

1. Do not obstruct Ø3.5 sensing area
2. Seal between Ø6.2 and Ø9.0 (if different to atmosphere)
3. Pin out details: Pin 1: + V supply (See note 5) Pin 2: Signal output Pin 3: 0 V supply
4. All dimensions ±0.1mm unless otherwise stated

5. Input voltage selector hole:

a) When filled with solder the onboard regulator is disabled
A regulated supply of 3.0 - 3.6 V (typically 3.0 V) is then required.
b) When not filled with solder the onboard regulator is enabled.
A regulated or unregulated supply between 3.6 - 10 V is then required
for IS applications, or up to 18 V for non-IS applications
Normally shipped with regulator disabled.

---------------------------------------

Ms.Lieen Skype: isweek_lieenli
Sales Dept. Shenzhen week technology ltd.
Tel: +86-755-83289036 Ext. 817 
Fax: +86-755-83289053
www.isweek.com