· 470W - 7,800 K discharge lamp

· Large 160mm diameter front lens

· Electronic focusing for a perfectly sharp light beam along its entire length

· Electronic Zooming 4°-50°(Spotlight mode)

· 2.5° aperture and “pipe” effect (Beam mode)

· CMY mixing system with gradually fading color wheels

· 14 special color filters on three wheel

· 2 CT0 filters (3,200K and 2,500K) + 1 CTB filter

· Wheel with 6 HQ dichroic rotating gobos

· Wheel with 18+1 fixed metal gobos

· 6 beam reducer filters on the gobo wheel

· Advanced visual effect disc (animation disc)

· 2 indexable rotating prisms (8-facet and linear 4-facet prism)

· Frost unit to simulate a wash projection

· High Precision dimmer and stop-strobe effect

• Rapid and extensive pan and tilt movements

· High performance electronics and firmware

POWER SUPPLIES: 115/230V 50/60 Hz

Automatic Power supply switching
INPUT POWER：700VA at 230V 50Hz

Lamp source:

470W discharge lamp

-Type: MSD Platinum 20R
-Color Temperature: 7,800 K
-Life: 1,500hrs
-Luminoux flux: 23,000 lm
-Cap by faston TM 250 (6.35 mm)

OPTICS

160mm diam. front lens

· Electronic focusing for a perfectly sharp light beam along its entire length

· Zoom ranging from 4° to 31° for fixed gobos sharp focusing

· Zoom range from 6.7° to 50° for rotating gobos sharp focusing

· BEAM mode with 2.5° aperture and “pipe” effect

COLOR SYSTEM

CMY color system based on 3 gradually fading color wheels
14special color filters on three wheels

2 CT0 filters (3,200K and 2,500K) + 1 CTB filter

EFFECTS SECTION

2 gobo wheels

-- wheel with 6 HQ dichroic, indexable and interchangeable rotating gobos (Ø 25.9mm).

-Wheel with 18+1 fixed metal gobos((including 6 beam reducers)

-Selectable gobo-shake function

-Advanced Visual Effect Disc (Animation disc)

2 indexable and interchangeable rotating prisms (8-facet and linear prism)

Frost unit to soften the beam edge

0-100% Mechanical dimmer

Mechanical shutter and adjustable speed strobe effect

CONTROL AND PROGRAMMING

30/34 DMX 512 control channels

DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display 

Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Focus Indexing Resolution: 8 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection:  5 pole XLR input and output

Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover

Two side handles for transportation
Device locking PAN and TILT mechanisms for transportation and maintenance

 

MOVING BODY

Angle:
 - PAN = 540° - TILT = 244°
Resolution:

- PAN = 2.11° - PAN FINE = 0.008°
- TILT = 0.960° - TILT FINE = 0.004°

Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.

 

ELECTRONICS

·Long life self-charging buffer battery.

·Pre-set macros

·Function reset from control unit
·"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
·ON/OFF lamp control from the lighting desk.
·Function reset from the lighting desk.
·"AUTOTEST" function from menù
·Ethernet is ready
·Electronic monitoring with status error

·Cooling system monitoring

·DMX level monitoring on all channels

·Internal data transmission diagnostics

·Firmware Upgrade with no power
·Firmware upload from another fixture

 

SAFETY DEVICES

Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating or failed operation of cooling system.

Forced ventilation with axial fans.

 

WORKING POSITION

Any Working Position

Hanging system: with fast-lock omega clamps (1/4 turn) on the base

Weight：31 kg 

Please contact:roselighting89@hotmail.com/roselighting89@gmail.com

whatsapp:+86 15889957415

Skype:rose.zhou4

Thanks