SK1000 Magnetic Drive Mixer Introduction

Magnetic Drive Agitators are the result of many years of experience which are the basis for our know-how in process engineering.
Several important chemical reactions are carried out in somewhat hazardous conditions.

Examples of such reactions are as follows:
1) Pressure Reactions, such as Hydrogenation, Amination, etc.
2) Reactions with noxious gases.
3) Manufacture of potent pharmaceuticals, such as hormones, oncology products, etc.
4) Any other reactions requiring complete containment, and where there are zero leakage requirements.

We supply Reactors with Top Entry Magnetic Seals. This sealing system comprehensively eliminates all possible leakage risks, by incorporating non-contact magnetic seals. The agitator shaft does not puncture the Reactor Vessel.

Operating principle
• A Magnetic seal comprises of a sealed chamber (Shroud), which contains a rotating Inner Shaft, which is embedded with powerful Inner Magnets. This inner shaft is supported on Upper and Lower Bearings. These are special Bearings, capable of withstanding harsh environments present inside the Reactor. A special barrier filter prevents dust from entering the Bearing Area.
• The output shaft of Motor/Gearbox assembly is locked on to an Outer Rotor, which is fitted with an Outer Magnet Assembly. When the Motor is switched on, the Outer Rotor Rotates, and magnetic flux causes the inner shaft to rotate synchronously with the Outer Rotor.
• Top Entry Magnetic Seals are the safest method for sealing agitated Reactors. Their applications include High Pressure Autoclaves such as Hydrogenators, as well as Reactors used for handling sensitive or hazardous products.
• SunKaier manufactures a wide range of Top Entry Magnetic Seals, for use in their Reactors. These are suitable for Reactors of up to 50000 liters capacity, temperature up to 300° C, and for pressure up to 100 Bars. Reactors of higher capacities and ratings can be supplied with special designs.

Advantages

• 100% sealing,ZERO leakage

• Long equipment life

• Trouble free operation

• Zero emission of hazard fluids

• Minimal friction saves power

• Suitable for pressure fluction

Applications
• Hydrogenation
• Oxidation
• Ozonisation
• Carboxylation
• Amination
• Aminolysis
• Ethoxylation
• Similar gas slurry reaction
• Pharma industry
• Dyes & intermediates
• Aromatic chemicals
• Agro chemicals & fine chemicals
• Speciality chemicals industries