M8 Panel Mount Connectors have two types of A Coding and B coding connectors. The connection methods of power and signal have PCB contacts with through hole Pins , solder contacts with soldering cups and dip soldering with single wires. The installation methods have front panel mount and rear panel mount between M8 PCB connectors and Board. There is a type of M8 connector with flange and it can be fastened by holes in flange and screw.

Material and specifications
Coupling Threaded coupling
Shell material Brass nickle plated
Insert material PA66+30%GF
Contact material copper(silver /gold plated)
Termination Soldering
Mating cycle 500
Temperature Range -25ºC ~+85ºC
Cable diameter ≤ φ3.3-5.0mm
 
Specification
Number of Contacts                   3,         4,        5,               6,       8
Rated Voltage                                      60V                           30V
Rated Current                                       4A                            1.5A
Contact Resistance  <5mΩ
Insulation Resistance  >100MΩ
Pollution Degree  3
Temperature Range  -20ºC to +85ºC
Degree of Protection  IP67 when mated
Mating Times  100 cycles
Nom Pin φ                                        1.0±0.03                      0.8±0.03
Wire Gauge                                         24AWG                       26AWG
Cable Jacket  PVC or PUR  
Material of Housing  Brass Nickel Plated
Material of lnsertion  PA66+GF UL94V-0
Material of Contact   Male Brass/Female Phosphor Bronze ,Gold Plated