Performance features

This product is a water-based emulsion, non-toxic non-combustible, can peel performance is superior, no residues on the substrate.Suitable for manufacturing of viscosity, high viscosity of protective film.Film cohesion is strong, high transparency, easy to use, fast drying speed, ageing resistance performance is good.

Specifications

Appearance：Milky white liquid

Viscosity：14-30 s (25 ℃ Tu-4)

Solid content：40%-42%

PH value：6-7

Shelf life: 0 to 50 ℃ for 6 months
Packing: 50 kg plastic barrels

Use technology and matters needing attention
1. Mainly suitable for PE protective film substrate, etc.Products can be used in the aluminum-plastic plate, aluminum, stainless steel, electronics, artificial stone, floor tile, etc.Can also be used for PET protective film, etc.
2. According to different base material, coating thickness can be adjusted to make different viscosity of protective film.
3. 2-7 ‰ dosage of curing agent as the main agent, stir before use.
4. Water dilution ratio of main agent and curing agent dosage should be adjusted according to customer demand for viscosity.General under the condition of a certain mesh of anilox roll, water content and lower protective film gram force have a certain proportion relations.Can be adjusted according to the customer request the viscous, medium viscosity, low viscosity of protective film.Slightly sticky and special protective film of high viscosity of the application of special protective film glue.