Application of the Pad Printing Silicone Rubber

Pad printing silicone rubber is mainly applicable to the printing of irregular patterns on plastics toys, electroplating products, electronic, trademarks, artwork gifts, and stationary, etc. And the silicone pad is a carrier which transfers the patterns from the steel plate onto the products’ surface, it has the advantage of good printing effects, good quality, good resilience and without any impurity.

Operation method of the pad printing silicone rubbuer.

1. Firstly, you should prepare all the tools such as the pad mold, the cup for mixing, and a glass stick.

2. Then clean the pad mould with detergent, and dry it with a piece of cloth or an air gun.

3. After that, mix the pad printing silicone rubber and the silicone soil as your own requirements. Generally, the larger the size of the pattern you need to print, the more silicone oil is needed.

FAQ of the pad printing silicone oil:

Why does the silicone mould appear to be dry outside but wet inside?

Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing the moisture from the air. In order to provide a significant shelf life for the silicon rubber, we will dry out the water in the silicone rubber.

Solution: add 0.05 percent of water into the silicone rubber and stir over a low speed briefly when you use it.

And if you are interested in the rtv-2 silicone rubber, you can contact Charlie at ottCharlie66 (at) gmail (dot) com or +86 137-1222-9345.