Product Description

Mast support rack is arranged on the basis of the mast upright metal stents, support legs, expand the use of stents, to stretch the legs, placed on the ground。

Mast support rack has the following form：

◆ Non-adjustable support leg masts, codenamed TB, three support legs。
◆ Adjustable leg support mast, codenamed TK, including adjustable lower adjustable, support leg three or four。
◆ Wheeled carriage mast, codenamed TKL, adjustable mast on the basis of adding two or three wheels, in order to move a short distance in the use of the site。
◆ Mast support frame chassis, codenamed TKP, on the basis of the pulley on the mast, increase chassis frame, in order to improve the stability of the mast。
◆ Wheel pressure carriage mast, symbol TD, on upright mast, adding a chassis and a frame, chassis, wheels or heavy objects required。
◆ Support frame masts belonging to a portable lifting device, after use can be concealed in a canvas bag, and easy to carry。
◆ Mast lift control can use our company’s control system, can also be used directly pump, pump; it can also be hand-pull small masts。

You can in our existing products, choose the specifications you need。

If an existing specification table does not meet your requirements mast, you need to contact us and tell us your initial height of the mast to the maximum height, load weight, we will design for you, usually within 48 hours via e-mail provide a drawing to you。E-mail:18151686252@163.com

　On how to improve the stability of the tripod mast

Because such lightweight structure below the mast, no fixed ground connecting member, the cylinder diameter is small, and therefore should be noted that the use of the load weight and volume thereof, and the use of the environment. We have to solder the hole or to the support frame mast foot support legs, the customer can decide whether to configure have to solder and tow rope. Greater use of wind when the weather is recommended to solder and tow rope fixed method to improve its stability, reduce insecurity。