Product introduction

DC reactor, also called advection reactor, is used in the DC site of converter to limit the AC component superimposed on DC current, reduce the current waveform distortion caused by capacitor filter, decrease current pulsating quantity, increase the power factor of converter, restrain the harmonic produced in the inverting process of converter and reduce the harmonic influence on rectifier device and power grid.   

Technical parameters:
1. Rated current ≤1600A
2. Dielectric strength: winding - earth 3000VAC / 50Hz / 60s no arcing or breakdown
3. Insulation resistance: winding - earth, cross-core screw rob - earth 500VDC, insulation resistance value ≥100MΩ
4. Noise level < 65db (The testing point's horizontal distance from transformer shall be 1 metre. )
5. Protection grade: IP00
6. Insulation class: H
7. Product standards: IEC289:1987 Reactors

                            GBI0229-88 Reactor (EQV IEC289:1987) 

Application environment and conditions:
1, The altitude is not more than 1000 meters and if more than 1000 meters, derating is required.
2, Running temperature: -5 ℃ - 40 ℃, relative humidity is less than 90%. 
3, Without harmful gas, inflammable, explosive and conductive dust around.